Panasonic Viera TH-42PX600 Operating Instructions Manual

Also see for TH-42PX600U: Technical guide Service manual Technical guide Operating instructions Operating instructions

53FAQs, etc.Technical InformationDCIMP1000001.JPGP1000002.JPGP1000003.JPGP1000004.JPG100_PANAData format for Card browsingCreated automaticallyNoteCaution• A JPEG image modified with a PC cannot be displayed.• Partly degraded files might be displayed at a reduced resolution.• Folder structure viewed in PC• The folder and file names may be different depending on the digital camera used.• Suitable SD Memory Cards. Please confirm the latest information on the following website.http://panasonic.co.jp/pavc/global/cs (This site is in English only)Photo: Still images recorded with digital still cameras compatible with JPEG files of DCF* and EXIFstandardsData format: Baseline JPEG 160X120-2,560X1,920 pixels (Sub-sampling: 4:4:4, 4:4:2 or 4:2:0)Max. number of files: 9,999Image resolution: 8 x 8 to 5,120 x 3,840* DCF (Design rule for camera file system): A Japan Electronics and Information Technology Industries Association’s standardDIGITAL AUDIO OUT terminalsYou can enjoy your home theater by connecting a Dolby Digital (5.1 channel) decoder and “Multi Channel” amplifierto the DIGITAL AUDIO OUT terminals.Caution• Depending on your DVD player and DVD-Audio software the copyright protection function may operate and disableoptical output.• External speakers cannot be connected directly to PROG.OUT terminals.• When ATSC channel is selected, the output from the DIGITAL AUDIO OUT jack will be Dolby Digital. When NTSCchannel is selected, the output will be PCM.3-digit folder number + 5-digit arbitrary characters4-digit arbitrary characters + 4-digit file number• Usable characters: 1-byte “a to z”, “A to Z”, “0 to 9,” and “_”Control with HDMI “HDAVI ControlTM”HDMI connections to some Panasonic equipment allow you to enjoy the easy playback or home theater.• Setup the equipment to enable this function. Read the manual of the equipment.• Switch the TV unit on again with the equipment on when connection or setup is changed.• This function may not work normally depending on the equipment condition.• The equipment can be operated by TV’s remote control with this function on even if TV is in Standby mode.• Image or sound may not be available for the first few seconds when the playback starts.• Image or sound may not be available for the first few seconds when Input mode is switched.• Volume function will be displayed when adjusting the volume of the equipment.• Easy playback is also available by using the remote control for Amplifier. Read the manuals of Amplifier.