55FAQs, etc.Technical InformationDo not display a picture in 4:3 mode for an extended period, as this can cause an after-image to remain on either orboth sides of the display field.To reduce the risk of such an after-image, change the brightness of the side bars.• The side bar may flash (alternate black/white) depending on the picture. Using Cinema mode will reduce suchflashing (see below).Side BarSide Bar4:3ScreenDisplayafter-imagesPic. mode• Vivid (default) : Provides enhanced picture contrast and sharpness for viewing in a well-lit room.• Standard : Recommended for normal viewing conditions with subdued room lighting.• Cinema : For watching movies in a darkened room. It provides a soft, film-like picture.TV Guide (Reminder Screen)If you skip TV Guide On Screen Setup you see the TV Guide On Screen Reminder screen the next time you powerOn your TV.Press Ÿ/ź to highlight an option, and press OK.• Start setup : Begins setup process• Remind me to set up later : Closes screen and displays reminder next time you powerOn the TV• Don’t remind me again : Closes screen and does not display reminder next time youpower On the TVPress to close the screen.Split - Screen• TV screen (RF input) cannot be displayed in both main and split frame simultaneously.• Split function is not available when HDMI input and PC input is displayed. HDMI signal and PC input cannot bedisplayed in Split frame.CableCARD TM• This menu is used to provide information when a CableCARD TM is insertedinto the CableCARD TM slot on the back of the television. “CableCARD” is notaccessible without inserting a CableCARD TM into the CableCARD TM slot. Toreceive the features offered by your cable company, you may have to subscribeto those services.NotePlease contact your cable company regarding availability of the CableCARD TM.The CableCARD TM is needed to receive premium digital services (where available) through the Cable input. You mayalso be able to order call-ahead pay per view events.CableCARD