Panasonic Viera TH-L47DT50A Operating Instructions Manual

Also see for Viera TH-L42DT50Z: Operating instructions

Contents

USB HDD / SD Card Recording64Setting for USB HDD / SD CardFormat and setup the USB HDD with this TV in order to use it for recording.Depending on the conditions of the SD Card, the recording may not work properly. Formatting the SD Card with this TVwill resolve this problem. (All data will be erased when formatting.)● Before the settings, connect the USB HDD / SD Card (p. 63) and be sure to turn on the USB HDD.● Prepare the USB HDD for the exclusive use of recording with this TV.Select [USB HDD Setup] or [SD Card Formatting] and setUSB HDD SetupRecording SetupAccessAccessSD Card FormattingSD Card Information Accessselectaccess● To check the information of theinserted SD Card[SD Card Information]Setup the USB HDD [USB HDD Setup]All the USB devices recognised as a mass storage device will be listed.● You can only choose one USB HDD for recording at a time.● You cannot change the settings for the USB HDD while recording is in progress.● Please note that USB HDD will be formatted and all data in it will be erased after this setup.1 Select the USB HDD for recording and start setupUSB Drive AUSB Flash DiskUSB HDD SetupProduct Nameselectaccess● Some USB HDD may not be displayed.● For the information of the highlighted device2 Caution and confirmation of using USB HDDSelect [Yes] to proceedThe data recorded to the USB HDD with this TV can onlybe played back on this TV.You cannot playback it with other TV (including the TVof the same model number) or any PCs.If your TV is repaired due to a malfunction, the USBHDD may not be available with your repaired TV.Continue?USB HDD FormattingYes NoTo use this device for recording,it must be formatted first.Continue?USB HDD FormattingYes NoThis device will be formatted andall contents deleted.Are you sure?USB HDD FormattingYes Noselect [Yes]setselect [Yes]setselect [Yes]set3 Confirmation of USB HDD nameUSB HDD FormattingEdit name?Yes NoName : USB Drive A selectsetThe name for the USB HDD is created automatically. If you want to edit the name, select [Yes].Set characters StoreUSB HDD 1USB HDDNameselectset● You can set characters by usingnumeric buttons.4 Confirmation to enable USB HDD for recordingIf the formatted USB HDD for recording already exists, this confirmation screen will be displayed to switch to enablethis USB HDD for recording.Do you want to enable thisdevice now for recording?When disconnecting any USB device,always use the "Safely Remove USB" functionin the USB HDD Device Setup menu to avoidany corruption of recorded content.USB HDD FormattingYes Noselect [Yes]set