Panasonic Viera TH-L47DT50A Operating Instructions Manual

Also see for Viera TH-L42DT50Z: Operating instructions

Contents

Link Functions (VIERA Link)90VIERA Link “ ”∗∗Enjoy additional HDMI Inter-Operability with Panasonic products which have “HDAVI Control” function.This TV supports “HDAVI Control 5” function.These features are limited to models incorporating “HDAVI Control” and “VIERA Link”.● Some functions are not available depending on the equipment’s version of HDAVI Control. Confirm the connectedequipment’s version of HDAVI Control.● VIERA Link “HDAVI Control”, based on the control functions provided by HDMI which is an industry standard knownas HDMI CEC (Consumer Electronics Control), is a unique function that we have developed and added.As such, its operation with other manufacturers’ equipment that supports HDMI CEC cannot be guaranteed.● Please refer to individual manuals for other manufacturers’ equipment supporting VIERA Link function.● About applicable Panasonic equipment, consult your local Panasonic dealer.Preparations● Connect the equipment supporting VIERA Link.● VIERA Link connection (p. 88, 89)● Use fully wired HDMI compliant cable. Non-HDMI-compliant cables cannot be utilised.Recommended Panasonic’s HDMI cable part number:• RP-CDHS15 (1.5 m) • RP-CDHS30 (3.0 m) • RP-CDHS50 (5.0 m)● Set up the connected equipment. Read the manual of the equipment.● For optimal recording, the settings of the recorder may need to be changed. For details, read the manual of therecorder.● Set [VIERA Link] to [On] in the Setup Menu. [VIERA Link] (p. 48)● Set up the TV.After connection, turn the equipment on and then switch the TV on.Select the input mode from HDMI1, HDMI2, HDMI3 or HDMI4 (p. 30), and make sure that an image is displayedcorrectly.This setup should be done each time when the following conditions occur:• for the first time• when adding or reconnecting equipment• when changing setupFeatures availableChannel downloadChannel settings can be downloaded to the recorder.Easy playbackAutomatic input switching - When the connected equipment is operated, input mode is switched automatically.Power on linkSet Power on Link [On] in the Setup Menu to use this function [Power on Link] (p. 48)When the connected equipment starts playback or direct navigator / function menu for the equipment are activated, theTV is automatically turned on. (Only when the TV is in Standby mode.)Power off linkSet Power off Link [On] in the Setup Menu to use this function [Power off Link] (p. 48)When the TV is set to Standby mode, the connected equipment is also automatically set to Standby.● This function will work even if the TV enters Standby mode automatically by auto power standby function.