Panasonic Viera TH-P42GT20Z Operating Instructions Manual

32Menu Item Adjustments / Configurations (alternatives)Picture3D-COMBMakes still or slow moving pictures look more vivid (Off / On)Occasionally, while viewing still or slow moving pictures, colour● patterning may be seen. Set to “On” to display sharper and moreaccurate colours.For PAL or NTSC signal reception only● Not valid on Component, S-Video, PC, HDMI and Media Player●PanelTurns the screen off when you select “Off” (Off / On)The sound is active even if the screen turns off.● Press any buttons to turn the screen on.● This function is effective in reducing power consumption when listening● to a sound without watching the TV screen.Advanced Settings Sets the detailed picture settings (p. 40)ResetPicture DefaultsPress the OK button to reset settings of Picture Viewing Mode to thedefault.SoundModeSelects basic sound mode (Music / Speech / User)The selected mode affects all input signals.●Music : Improves sound quality for watching music videos, etc.Speech : Improves sound quality for watching news, drama, etc.In Music and Speech modes, you can adjust “Bass” and “Treble”● settings, and those settings will be stored for each mode.User : Adjusts the sounds manually by using the equalizer to suit yourfavourite sound quality.For the User mode, “Equalizer” will appear on the Sound Menu● instead of “Bass” and “Treble”. Select the “Equalizer” and adjustthe frequency. “Equalizer” (below)Bass Increases or decreases level to enhance or minimise lower, deeper sound outputTreble Increases or decreases level to enhance or minimise sharper, higher sound outputEqualizerAdjusts the frequency level to suit your favourite sound qualityThis function is available when “Mode” is set to “User”.● Select the frequency and change the frequency level by using the cursor button.● If you want to enhance the bass sound, raise the level of the lower● frequency. If you want to enhance the treble sound, raise the level of thehigher frequency.To reset the levels of each frequency to the default settings, select the● “Reset Equalizer Settings” by using cursor button, and then press theOK button.Balance Adjusts the volume level of right and left speakersHeadphone Volume Adjusts the volume of the headphonesSurroundSurround sound settings (Off / V-Audio / V-Audio Surround / V-AudioProSurround)V-Audio : Provides a dynamic enhancer to simulate improvedspatial effectsV-Audio Surround : Provides a dynamic enhancer of width and depth tosimulate improved spatial effectsV-Audio ProSurround : Provides a three-dimensional sound space withdigital reverb effects● Switching is also possible by the Surround button on the remote control (p. 10).Volume Correction Adjusts the volume of individual channel or input modeSpeaker Distanceto WallAdjusts the low frequency sound (Over 30cm / Up to 30cm)If the back space between the TV and wall is over 30 cm, “Over 30cm”● is recommended.If the back space between the TV and wall is within 30 cm, “Up to● 30cm” is recommended.Preferred AudioLanguageSelects the default language for Digital TV multi audio (depending on thebroadcaster)(English / Maori / French / German / Italian / Spanish / Korean /Chinese-Mandarin / Chinese-Cantonese / Japanese / Hindi)MPXSelects multiplex sound mode (if available) (p. 74)Normally : Stereo● Stereo signal cannot be received: Mono● M1 / M2 : Available while mono signal is transmitted● Analogue TV mode only●