62Network settings for the Wireless LAN connectionSelect “Network Type” and set to “Wireless”setselectThis setting is for the network connection by using Wireless LAN Adaptor.Network SetupNetwork Type WirelessAccess Point SettingsIP/DNS SettingsProxy SettingsNo settingsConnection TestVIERA Name VIERASoftware UpdateMAC Address ab-cd-ef-gh-ij-klselectaccessSelect “Access Point Settings”Network SetupNetwork Type WirelessAccess Point SettingsIP/DNS SettingsProxy SettingsNo settingsConnection TestVIERA Name VIERASoftware UpdateMAC Address ab-cd-ef-gh-ij-klSelect the connection type and setselectaccessConnection TypePlease select network connection type.WPS (Push button)WPS(PIN)Search for access pointManualConfirm the connection status of “Access Point Settings”- - - : “Wired” is selected in “Network Type”.No adaptor : Wireless LAN Adaptor is not connected.No settings : Setting for connecting to the access point has not been set.Connecting... : Connecting to the access point in progress.Connected : Wireless LAN connection to the access point succeeded.To display the current access point settings, press● the OK button.To change the settings, select “No” on this screen.Some access points do not allow access to the● internet. Perform “Connection Test” (below) to checkif internet connection is available.USBovercurrent :Overcurrent errorNetwork SetupNetwork Type WirelessAccess Point SettingsIP/DNS SettingsProxy SettingsConnectedConnection TestVIERA Name VIERASoftware UpdateMAC Address ab-cd-ef-gh-ij-klSelect “Connection Test” and access to testPerforms automatic testing of the networkconnection for the TV. (This may take some time.)selectaccessNetwork SetupNetwork Type WirelessAccess Point SettingsIP/DNS SettingsProxy SettingsConnectedConnection TestVIERA Name VIERAAccessSoftware UpdateMAC Address ab-cd-ef-gh-ij-klConnection TestCheck access point connection.Check acquired IP address.Check for devices using same IP address.Check gateway connection.Check server connection.succeededThe test is successful and the TV is connected to thenetwork.failedCheck the settings and connections, and then perform thisfunction again.If you continue to have difficulty, please contact yourinternet service provider.::Using Network Services(DLNA / VIERA CAST)WPS(Push button) p. 13WPS(PIN) : Sets by entering the PIN code to the accesspointSearch for access point p. 13Manual : Sets manually by entering the SSID ofaccess point