Panasonic Viera TH-P42GT20Z Operating Instructions Manual

Advanced How to Use Menu Functions33Menu Item Adjustments / Configurations (alternatives)SoundDigital AudioPreferenceSelects the initial setting for audio tracks (Dolby D / HE-AAC)Dolby D : The priority is given in the following order - Dolby Digital,HE-AAC, MPEG1.HE-AAC : The priority is given in the following order - HE-AAC, MPEG1,Dolby Digital.Dolby Digital is the method of coding digital signals developed by Dolby● Laboratories. Apart from stereo (2ch) audio, these signals can be multi-channel audio.HE-AAC is a perceptual coding method used to compress digital audio● for efficient storage and transmission.MPEG1/Layer-2 is an audio compression method that compresses● audio to the smaller size without any considerable loss of audio quality.Digital TV mode only●SPDIF SelectionSPDIF : A standard audio transfer file formatSelects the initial setting for digital audio output signal from DIGITALAUDIO OUT terminal (Auto / PCM)Auto : Dolby Digital is output as Dolby Digital Bitstream. HE-AAC andMPEG are output as PCM.PCM : Digital output signal is fixed to PCM.For Digital TV mode, Video mode (p. 54) or Network video contents● (p. 64)MPEG OpticalLevelAdjusts the audio level of MPEG output from DIGITAL AUDIO OUTterminal as the initial setting (0 / -2 / -4 / -6 / -8 / -10 / -12dB)● Normally, MPEG sound is louder comparing with the other types of audio track.Digital TV mode only●HDMI1 / 2 / 3 / 4InputSelect to fit the input signal (Digital / Analogue) (p. 75).Digital : HDMI cable connectionAnalogue : HDMI-DVI adaptor cable connectionHDMI input mode only●ResetSound DefaultsPress the OK button to reset settings of the present Mode, Balance,Headphone Volume and Surround in the Sound Menu to the default.Setup3D Settings Adjusts and sets to view 3D images (p. 26)PC SetupInputResolutionSwitches to a wide viewVGA (640 × 480 pixels), WVGA (852 × 480 pixels),● XGA (1,024 × 768 pixels), WXGA (1,280 × 768 pixels, 1,366 × 768 pixels)Options change depending on signals●Clock Set to the minimum level if noise occurs.H-posAdjusts horizontal positionV-posAdjusts vertical positionClock Phase Eliminates flicker and distortionAdjust after Clock adjustment● ● Set to the minimum level if noise occursSyncPC sync signal type (H & V / SOG)H & V : by the horizontal and vertical signals from your PCSOG : Sync on Green sync from your PCResetPC Settings Press the OK button to reset the PC Setup settings to the default.DVI PositionSettings H-pos Adjusts horizontal position settings of DVIV-pos Adjusts vertical position settings of DVIReset DVIPosition Settings Press the OK button to reset the DVI Position Settings to the default.Off Timer Sets the time the TV automatically goes to Standby mode(Off / 15 / 30 / 45 / 60 / 75 / 90 minutes)USB HDD Setup Registers the connected USB HDD and makes the settings for therecording (p. 46)Child Lock Locks a channel / AV input to prevent access to it (p. 42)