Using Common Interface49Using Common InterfaceThe Common Interface Module menu provides access to software contained on Common Interface (CI) Modules.This TV works only for Pay TV modules complying with CI standard.tThis function is not available for BskyB’s Sky channels.tVideo and audio signals may not be output depending on broadcasts or services.CautiontTurn Off Mains power On / Off switch whenever inserting orremoving the CI module.tIf a viewing card and a card reader come as a set, first insertthe card reader, then insert the viewing card into the cardreader.tInsert the module in the correct direction.Side of the TVCommon interfaceInsert or remove straightlyand completelyCI slotCI moduleInsert the CI module (optional)tThe features that appear on screen are dependent on the contents of the selected CI module.tFollow the instructions that came with the viewing card to tune in the encrypted channels. If encrypted channels do notappear, perform the below to verify the card is recognised by the TV.tFor more details, see the manual of the CI module, or check with the broadcaster.RETURNjklghi mnotuvpqrs wxyzabc defDIRECT TV RECNASPECTAVSD CARDOPTIONINDEX HOLDSTTLTEXTLAST VIEWPROGRAMMEEXITMENUINPUTTV To return to TVEXIT1 Select DVBTV2 Display the menuMENU3 Select [Setup]Main MenuPictureSoundSetupaccessselect4 Select [System Menu] 2/2Setup MenuAccessOther SettingsSystem Menuaccessselect5 Select [Common Interface]System MenuShipping ConditionSystem UpdateSoftware LicenceSystem InformationCommon InterfaceOwner IDAccess accessselect6 Access Common InterfaceCommon InterfaceSlot 1: Module insertedaccess How to operate servicesFollow the on screen operation guide.(Check the instructions provided with the CI module.)Example :tSelect, go tSymbol : tColoured charactersColoured buttontOn screen operation guide may not correspond to the remote control buttons.