Panasonic Viera TX-L19E3B Operating Instructions Manual

Contents

FAQs | On screen messages77Problem ActionsOtherParts of the TV becomehot tTemperature rises of parts of the front, top and rear panels will not pose any problems interms of performance or quality of the TV.The LCD panel movesslightly when it ispushed with a fingerClattered sound mightbe heardtThere is some flexibility around the panel to prevent damage to the panel.tThe panel might move slightly when it is pushed with a finger, and clattered soundmight be heard. This is not a malfunction.There may be red spots,blue spots, green spotsand black spots on thescreentThis is a characteristic of liquid crystal panels and is not a problem. The liquid crystalpanel is built with very high precision technology giving you fine picture details.Occasionally, a few non-active pixels may appear on the screen as a fixed point of red,green, blue or black. Please note this does not affect the performance of your LCD.An error messageappearstFollow the message’s instructions.tIf the problem persists, contact your local Panasonic dealer or the authorized ServiceCentre.On screen messagesMessage Meaning / ActionAll tuning data will be erased t[Shipping Condition] will erase all tuning data (p. 47)Are you sure ? tConfirm correct operation.Are you sure you want to deletethis timer ?Press OK to delete timer.Press RETURN to return.tConfirm correct operation.Bad signal tThe signal is weak. Check the aerial is plugged in properly. It may be necessary tohave an aerial installer check the signal and aerial alignment.tReset channels. (p. 36)Child Lock is active!Press OK to enter PIN. tThe selected channel is locked in Child Lock (p. 43). You must enter the PIN numberbefore the channel will be displayed.Feature not available. tIt is not possible to record from COMPONENT or HDMI. Connect the recorder to theTV using a fully wired SCART cable for recording from the TV tuner.tConfirm Q-Link or VIERA Link settings (p. 59 - 62)Feature not available.Press OK to view how it works. tThe selected feature on VIERA TOOLS is not available. Press the OK button to viewthe demonstration to explain how to use it.Found new software version .Press OK to start update (maytake over 40 mins) or press EXITto ignore and you can updatewhen TV is in standbytThere is a new software available.Invalid operation - Please checksettings and connections. tCheck the Q-Link or VIERA Link connection and setting (p. 59 - 62)Invalid system time. Please exit ! tCannot get the time information and cannot edit Timer Programming screen.Check the connection of the RF cable.Invalid system time, TimerProgramming will not work.Please press TV button onremote control and check timedisplay on BannertCannot get the time information. If there is no time displayed on the Informationbanner, check the connection of the RF cable.Max. number of timers alreadyset ! tThe maximum number of timer programming events is 15.