Watching External InputsWatching External Inputs24Watching External InputsConnect the external equipment (VCRs, DVD equipment, etc.) and you can watch through the AV input.To connect the equipment (p. 10, 11, 66, 67)The Remote Control is capable of operating some functions of selected external equipment.“Operating the equipment with the TV remote control” (p. 25)RETURNEXITDIRECT TV RECMENU NASPECTSD CARDOPTIONINDEX HOLDSTTLTEXTLAST VIEWTVjklghi mnotuvpqrs wxyzabc defINPUTTV AVPROGRAMMEREC To return to TVTV1 Turn the TV onWhen connecting with SCART as example 2 or 3 (p. 10, 11)Receives input signals automatically when playback startsInput signals are automatically identified by the SCART (pin 8)terminal.This function is also available for HDMI connections (p. 67).If input mode is not switched automaticallyPerform 2 and 3Check the setup of the equipment.2 Display the input selection menuAV3 Select the input mode connected to theequipmentInput SelectionAV1AV2COMPONENTHDMI1HDMI2TVSD CardselectwatchYou can also select the input using the AV button on the remote controlor the side panel of the TV (except [SD Card]).Press the button repeatedly until the desired input is selected.[SD Card] : Switches to Media Player “Using Media Player” (p. 51)You can label or skip each input mode (except [SD Card]).“Input Labels” (p. 44)Skipped inputs will not be displayed when the AV button is pressed.4 ViewAV1 Displays the selected modeTerminal AV1 AV2 COMPONENT HDMI1 HDMI2Manual input(default settingin “Input Labels”)AV1AV1-RGB AV2 COMPONENT HDMI1 HDMI2Auto input(EC mode orVIERA Link)EC/AV1EC/AV1-RGB ¡ ¡EC/HDMI1Applicable forEC mode andVIERA LinkEC/HDMI2ApplicableforVIERA LinkIf the above information is permanently displayed on the top left of the screen, press the button to clear.NoteIf the external equipment has an aspect adjustment function, set it to [16:9].For details, see the manual of the equipment or ask your local dealer.