Using Common Interface49Using Common InterfaceThe Common Interface Module menu provides access to software contained on Common Interface (CI)Modules.This TV works only for Pay TV modules complying with CI standard.This function is not available for BskyB’s Sky channels.Video and audio signals may not be output depending on broadcasts or services.CautionTurn Off Mains power On / Off switch wheneverinserting or removing the CI module.If a viewing card and a card reader come as aset, first insert the card reader, then insert theviewing card into the card reader.Insert the module in the correct direction.Rear of the TVInsert or removestraightly andcompletelyCI slotCI moduleInsert the CI module (optional)The features that appear on screen are dependent on the contents of the selected CI module.Follow the instructions that came with the viewing card to tune in the encrypted channels. If encryptedchannels do not appear, perform the below to verify the card is recognised by the TV.For more details, see the manual of the CI module, or check with the broadcaster.RETURNjklghi mnotuvpqrs wxyzabc defDIRECT TV RECNASPECTAVSD CARDOPTIONINDEX HOLDSTTLTEXTLAST VIEWPROGRAMMEEXITMENUINPUTTV To return to TVEXIT1 Select DVBTV2 Display the menuMENU3 Select [Setup]Main MenuPictureSoundSetupaccessselect4 Select [System Menu]Setup MenuSystem MenuLink SettingsChild LockDVB Tuning MenuAccessOffOff TimerNetwork SetupDisplay SettingsTV Guide SettingsTimer Programming1/2accessselect5 Select [Common Interface]System MenuShipping ConditionSystem UpdateSoftware LicenceSystem InformationCommon InterfaceOwner IDAccess accessselect6 Access Common InterfaceCommon InterfaceSlot 1: Module insertedaccess How to operate servicesFollow the on screen operation guide.(Check the instructions provided with the CI module.)Example :Select, go Symbol : Coloured charactersColoured buttonOn screen operation guide may not correspond to the remote control buttons.