Panasonic Viera TX-L32C4B Operating Instructions Manual

Safety Precautions4Safety PrecautionsWarning Mains plug and leadTo help avoid risk of electrical shock, fire, damage or injury, please follow the warnings below: ) ) ) ! ';;5;958:5Insert the mains plug fully into the socket outlet.Ensure that the mains plug is easily accessible.Remove the mains plug when cleaning the TV.Do not touch the mains plug with a wethand.If you detect anything unusual,immediately switch off the mains supplyswitch and remove the mains plug.Do not damage the mains lead.AC 220-240 V50 HzDo not place a heavyobject on the lead.Do not place thelead near a hightemperature object.Do not pull on the lead.Hold onto the mainsplug body whendisconnecting the plug.Do not move the TV with the lead plugged into a socket outlet.Do not twist the lead, bend it excessively or stretch it.Do not use a damaged mains plug or socket outlet.Ensure the TV does not crush the mains lead.IMPORTANT: THE MOULDED MAINS PLUGFOR YOUR SAFETY, PLEASE READ THE FOLLOWING TEXT CAREFULLY.This TV is supplied with a moulded three pin mains plug for your safety and convenience.A 5 amp fuse is fitted in this mains plug. Shall the fuse need to be replaced, please ensure that the! "$ %) )! %: ) ) ! (J ! < +;Check for the ASTA mark or the BSI mark on the body of the fuse.If the mains plug contains a removable fuse cover, you must ensure that it is refitted when the fuse is replaced.If you lose the fuse cover the mains plug must not be used until a replacement cover is obtained.A replacement fuse cover may be purchased from your local dealer.If the fitted moulded mains plug is unsuitable for the socket outlet in your home, then thefuse shall be removed and the mains plug cut off and disposed of safety. There is a danger ofsevere electrical shock if the cut off mains plug is inserted into any 13 amp socket.If a new mains plug is to be fitted, please observe the wiring code as shown below.If in any doubt, please consult a qualified electrician.IMPORTANT: – The wires in this mains lead are coloured in accordance with thefollowing code: –Blue: Neutral Brown: LiveAs the colours of the wire in the mains lead of this appliance may not correspond withthe coloured markings identifying the terminals in your mains plug, proceed as follows.The wire which is coloured BLUE must be connected to the terminal in the mainsplug which is marked with the letter N or coloured BLACK.The wire which is coloured BROWN must be connected to the terminal in themains plug which is marked with the letter L or coloured RED.Under no circumstances should either of these wires be connected to the Earthterminal of the three pin mains plug, marked with the letter E or the earth symbol .How to replace the fuseFor plug type shown in example 1:Lift out the removable fuse compartment with a screwdriver and replace the fuse, ! % ) $! "J ) ") " +For plug type shown in example 2:Lift open the fuse compartment, in the mains plug, with a screwdriver, and replace %) 8 ! )) %) $ !&) $! "J) " ;Example 1Example 2