Panasonic Viera TX-L32DT30B Operating Instructions Manual

Also see for Viera TX-L32DT30B: Operating instructions

Contents

Tuning and Editing Channels56(Other Sat.) / (Satellite)You can tune all receivable digital satellite channels and create your channel list, etc.• Some of Other Sat. / Satellite functions may work to differing specifications (depending on the broadcasters).■ To return to TVEXIT1 Select freesat or Other Sat.Select SatelliteTV2 Display the menuMENU3 Select [Setup]Main MenuPictureSoundTimerSetupaccessselect4 Select [Other Sat. Tuning Menu]Select [Satellite Tuning Menu]Other Sat. Tuning Menu Accessaccessselect5 Select one of the following functionsAccessFavourites EditChannel ListAuto SetupManual TuningOther Satellite Tuning MenuAccessAccessAccessAdd New ChannelsSignal ConditionAccessAccessaccessselectSet all receivable digital satellite channels [Auto Setup]Any receivable digital compliant satellite channels can be tuned.• Only Other Sat. / Satellite channels are tuned or retuned.• All the previous tuning settings are erased.• If a Child Lock PIN number (p. 60) has been set, it must be entered.1 Select the satellite and then select [Start]Satellite Selection Astra2/EurobirdOther Satellite Auto Setup - Satellite Selectionfreesat and other channelsStart Startselect • Check the dish alignment for the satelliteyou want to select• Astra2/Eurobirdp. 10• Astra1, HotbirdPlease consult the received satellitebroadcasting companies.• Selectable satellites are Astra2/Eurobird, Astra1 and Hotbird.• If you want to tune from all available satellites, select [Any Satellite].2 Check the signal condition and the messageAstra2/Eurobird001010Other Satellite Add New Channels - Satellite Selectionfreesat and other channelsSatellite SelectionSignal QualitySignal StrengthSignal Lock LockedContinueOther Satellite Auto SetupAll Other Satellite tuning data will be erasedIf you select [Any Satellite], this step is skipped.• It takes a while to check the connection for your selected satellite.• Ensure that the Signal Lock status is shown as “Locked”.If it is not locked, the search cannot be executed.• If the status is shown as “Not locked” and Signal Quality / Signal Strength have no indications, please check the dish alignment.If the status is shown as “Not locked” but there are some levels of Signal Quality / Signal Strength indicated, select [AnySatellite] in Satellite Selection and try again.