Panasonic Viera TX-L32DT35E Operating Instructions Manual

Also see for TX-L32DT35E: Operating instructions

Contents

Viewing 3D images15To view the 3D imagesYou can enjoy the 3D images in a variety of ways.(Frame Sequential, Side by Side and Top and Bottom are the supported 3D format.)■ Playing back 3D-compatible Blu-ray disc (Frame Sequential format)• Connect the 3D-compatible player via a fully wired HDMI compliant cable.• If input mode is not switched automatically, select the input mode connected to the player.• If you use the non 3D-compatible player, the images will be displayed on 2D mode.■ 3D-supported broadcast• Please consult the suppliers of contents or programmes for availability of this service.■ 3D photos and 3D videos taken by 3D-compatible Panasonic products• Available in Media Player and Network services■ 2D images converted to 3DUse a 2D-to-3D conversion function [2D 3D] mode in [3D Mode Selection]1 Turn the 3D Eyewear on2 Put on the 3D Eyewear3 Watch the 3D images• Safety precautions will be displayed when you first watch the 3D image. Select [Yes] or [No] to continue to view 3Dimages.If you select [Yes], this message will be displayed again in the same condition after Mains power On / Off switch isnext turned On. Select [No] if you do not wish to display this message again.4 Turn off the 3D Eyewear after using itNote• 3D Eyewear is not included. Please purchase as necessary.• For more detail about using and wearing the 3D Eyewear, please refer to the manual of the 3D Eyewear.Changing 2D - 3D modeYou can easily change the viewing mode between 2D and 3D using the 3D button.Select the mode2D3D3D2D3D Mode Selectionsetselect • Items of [3D Mode Selection] varydepending on the condition.[3D] / [2D] / [2D 3D] :Displays the appropriate image that you desire without selecting 3D format• This mode may not work properly depending on the source image format. In this case, select the appropriate 3D formatmanually.■ To change 3D format manuallyWhen the image is not changed properly using [3D], [2D] or [2D 3D] mode, use this manual setting.During the above operation Select the mode(red)2D 3D3D Mode Selection (Manual)Top and Bottom - 2DTop and Bottom - 3DSide by Side - 2DSide by Side - 3DFrame Sequential - 2DFrame Sequential - 3DOriginalsetselect