Identifying Controls9 10 11FTVAV7861212345136TV1 CI slot2 HDMI4 terminal3 SD Card slot4 USB 3 port5 Headphones jack6 Function select• [Volume] / [Contrast] / [Brightness] / [Colour] /[Sharpness] / [Tint] (NTSC signal) / [Bass]∗ / [Treble]∗ /[Balance] / [Auto Setup]∗[Music] or [Speech] mode in the Sound Menu7 Channel Up / Down, Value change (when using the Fbutton), Switching the TV On (press either button forabout 1 second when in Standby mode)8 Changes the input mode9 Remote control signal receiver• Do not place any objects between the TV remotecontrol signal receiver and remote control.10 C.A.T.S. (Contrast Automatic Tracking System)sensor• Senses brightness to adjust picture quality when [EcoMode] in the Picture Menu is set to [On] (p. 18)11 Power and Timer LED•Red : StandbyGreen : OnOrange : Timer Programming OnOrange (flash) :Recording of Timer Programming, Direct TVRecording or One Touch Recording in progressRed with orange flash :Standby with Timer Programming On, Direct TVRecording or One Touch Recording• The LED blinks when the TV receives a commandfrom the remote control.12 Mains power On / Off switch• Use to switch the mains power.If you turned the TV Off during Standby mode by theremote control last time, the TV will be in Standbymode when you turn the TV On with Mains power On/ Off switch.13 Infrared transmitter for 3D Eyewear• Do not place any objects between the transmitterand 3D Eyewear.Using the On Screen Displays - Operation guideMany features available on this TV can be accessed via the On Screen Display menu.Operation guideOperation guide will help you to operate by using theremote control.Example : [Sound Menu]Main MenuPictureSoundTimerSetup1/2000011Mode MusicBassTrebleBalanceHeadphone VolumeSurroundAuto Gain ControlVolume CorrectionSpeaker Distance to WallOffOffOver 30cmSelectEXIT Selects the basic sound mode. Page upChangeRETURN Page downOperation guideHow to use remote controlMENU Open the main menuMove the cursor / select the menu item / select from arange of optionsMove the cursor / adjust levels / select from a range ofoptionsAccess the menu / store settings after adjustments havebeen made or options have been setBACK/RETURN Return to theprevious menuEXIT Exit the menu systemand return to the normalviewing screenAuto power standby functionThe TV will automatically go to Standby mode in the following conditions :• no signal is received and no operation is performed for 30 minutes in Analogue TV mode• [Off Timer] is active in the Timer Menu (p. 20)• no operation is performed for the period selected in [Auto Standby] (p. 20)• This function does not affect the recording of Timer Programming, Direct TV Recording and One Touch Recording.