Accessories4Attaching the standWarningDo not disassemble or modify the stand.• Otherwise the TV may fall over and become damaged, and personal injury may result.CautionDo not use any other TV and displays.• Otherwise the TV may fall over and become damaged, and personal injury may result.Do not use the stand if it becomes warped or physically damaged.• If you use the stand while it is physically damaged, personal injury may result. Contact your nearest Panasonic dealerimmediately.During set-up, make sure that all screws are securely tightened.• If insufficient care is taken to ensure screws are properly tightened during assembly, the stand will not be strong enough tosupport the TV, and it might fall over and become damaged, and personal injury may result.Ensure that the TV does not fall over.• If the TV is knocked or children climb onto the stand with the TV installed, the TV may fall over and personal injury may result.Two or more people are required to install and remove the TV.• If two or more people are not present, the TV may be dropped, and personal injury may result.Do not tilt the TV by placingsomething between the standand the floor. TV may fall over andbecome damaged, and personalinjury may result.Stand is very heavy. Pleasehandle with both hands asshown in image.Assembly screw (4)M4 × 30Stand• TBL5ZX0173 (TX-L32DT35E)• TBL5ZX0172 (TX-L37DT35E)Securing the TVUse the assembly screws to fasten securely.• Make sure that the screws are securely tightened.• Carry out the work on a horizontal and level surface.• Depending on the length of the screw driver you use, it isdifficult to tighten the two screws at the bottom. Make sureall screws are securely tightened.Foam mat or thick soft clothBack of the TVTo prevent from falling, please secure the TV to the wall by using strong string or wire.• Put the strong string or wire through the holeon the bottom rear of the TV as shown in theillustration.