Auto Setup12Quick Start GuideAuto SetupSearch and store TV channels automatically.tThese steps are not necessary if the setup has been completed by your local dealer.tPlease complete connections (p. 10, 11) and settings (if necessary) of the connected equipment before starting Auto Setup.For details of settings for the connected equipment, read the appropriate manual.1 Plug the TV into mains socket and switch OntTakes a few seconds to be displayed.tIf the red LED shows on the TV, press the Standby On / Off switch onthe remote control for at least 1 second to turn the TV On.2 Select your countryCountry SelectionUnited Kingdom IrelandsetselectExample :SearchingCH626262622933Channel NameCBBC ChannelBBC Radio WalesE4Cartoon NwkBBC1TypeFree TVFree TVFree TVFree TVAnalogueAnalogueQuality10101010--Free TV: 8 Pay TV: 0 Radio: 0 Data: 0 Analogue: 2Auto Setup - DVB and AnalogueDVB ScanThis will take about 6 minutes.Analogue Scan CH 21CH 21 6868Auto Setup will start to search for TVchannels and store them in the numberedorder as specified by the broadcasters.tActual number of channels may differ dueto channel duplication.Example :SearchingCH626262622933Channel NameCBBC ChannelBBC Radio WalesE4Cartoon NwkBBC1TypeFree TVFree TVFree TVFree TVAnalogueAnalogueQuality10101010--Free TV: 8 Pay TV: 0 Radio: 0 Analogue: 2Auto Setup - DVB and AnalogueDVB ScanThis will take about 6 minutes.Analogue Scan CH 1CH 5 416999 H:21Sending Preset DataPlease wait!0% 100%Remote control unavailableIf Q-Link or similar technology (p. 60)compatible recorder with analogue tuneris connected, analogue channel setting isautomatically downloaded to the recorder.(Digital channel setting is not downloaded.)tIf downloading has failed, you candownload later through the Setup Menu.“Q-Link Download” (p. 30)3 Input Owner ID* * * *Owner IDPlease enter new PINPINPlease enter your own choice of PIN number,name, etc. to help the police to crack crime.tMake a note of the PIN number in case you forget it. The PIN number cannot be reset.tYou can input or change the Owner ID later. [Owner ID] (p. 48)tTo skip this stepEXITtThis step will be skipped in the Auto Setup after [Shipping Condition] (p. 47) isperformed.TV