Watching External Inputs24Watching External InputsConnect the external equipment (VCRs, DVD equipment, etc.) and you can watch through the AV input.tTo connect the equipment (p. 10, 11, 66, 67)The Remote Control is capable of operating some functions of selected external equipment.“Operating the equipment with the TV remote control” (p. 25)RETURNEXITDIRECT TV RECMENU NASPECTSD CARDOPTIONINDEX HOLDSTTLTEXTLAST VIEWTVjklghi mnotuvpqrs wxyzabc defINPUTTV AVPROGRAMMEREC To return to TVTV1 Turn the TV onWhen connecting with SCART as example 2 or 3 (p. 10, 11)Receives input signals automatically when playback startstInput signals are automatically identified by the SCART (pin 8) terminal.tThis function is also available for HDMI connections (p. 67).If input mode is not switched automaticallyPerform 2 and 3tCheck the setup of the equipment.2 Display the input selection menuAV3 Select the input mode connected to the equipmentInput SelectionAV1AV2COMPONENTHDMI1HDMI2TVSD CardselectwatchtYou can also select the input using the AV button on the remote control or the sidepanel of the TV (except [SD Card]).Press the button repeatedly until the desired input is selected.t[SD Card] : Switches to Media Player [Using Media Player] (p. 51)tYou can label or skip each input mode (except [SD Card]). “Input Labels” (p. 44)Skipped inputs will not be displayed when the AV button is pressed.4 ViewAV1 Displays the selected modeTerminal AV1 AV2 COMPONENT HDMI1 HDMI2Manual input(default settingin “Input Labels”)AV1AV1-RGB AV2 COMPONENT HDMI1 HDMI2Auto input(EC mode or VIERALink)EC/AV1EC/AV1-RGB − −EC/HDMI1Applicable forEC mode andVIERA LinkEC/HDMI2ApplicableforVIERA LinktIf the above information is permanently displayed on the top left of the screen, press the button to clear.NotetIf the external equipment has an aspect adjustment function, set it to [16:9].tFor details, see the manual of the equipment or ask your local dealer.