Panasonic Viera TX-L32X3E Operating Instructions Manual

Also see for Viera TX-L32X3E: Service manual

Contents

Panasonic Viera TX-L32X3E Operating Instructions Manual Manual pdf 41 page image

Timer Programming41Timer ProgrammingTimer Programming from MenuThe Timer Programming menu allows you to choose programmes that you wish to remind watching or record to the externalrecorder. At the correct time, the TV will tune to the correct channel even if the TV is in Standby mode.TV Guide may also be used to set timer programming event (p. 20).tThis function is not available in Analogue mode.tTimer Programming can store up to 15 events.tTimer Programming only works reliably if correct time information is received via the signal from the broadcaster or serviceprovider.tFor recording using Timer Programming, the TV must be either On or in standby. For reminders to be displayed, the TV mustbe On.tNo other channel can be selected while the recording of Timer Programming is in progress.tIt may not be possible to record an encrypted programme (which is copy-protected).tWhen recording programmes to the external recorder, be sure to make the proper settings on the recorder connected to theTV.If a compatible recorder with Q-Link, VIERA Link or similar technologies is connected to the TV (p. 59, 60) and the [LinkSettings] (p. 30) are completed, no setting of the recorder is required. Also read the manual of the recorder.tIf the recorder is not compatible with Q-Link, VIERA Link or similar technologies, make timer programming of the recorder.For preparations of a recorder, read the manual of the recorder.tRecordings are always in standard definition composite video via SCART, even if the original programme is in high definition.t2 minutes before the starting time, a reminder message appears if you are watching TV.t To remove the message and start the programming t To cancel the programmingEXITRETURNDIRECT TV RECNASPECTAVSD CARDOPTIONINDEX HOLDSTTLTEXTLAST VIEWjklghi mnotuvpqrs wxyzabc defEXITMENUINPUTTV To return to TVEXIT To unlock the tunerand stop recordingEXIT1 Select the mode you want to set(DVB-C or DVB-T)(p. 14)TV2 Display the menuMENU3 Select [Setup]Main MenuPictureSoundSetupaccessselect4 Select [Timer Programming]Setup Menu 1/2Timer ProgrammingOff TimerEco NavigationLink SettingsChild LockDVB-C Tuning MenuLanguageDisplay SettingsCommon InterfaceOffAccessaccessselect