Panasonic Viera TX-L32X3E Operating Instructions Manual

Also see for Viera TX-L32X3E: Service manual

Contents

Panasonic Viera TX-L32X3E Operating Instructions Manual Manual pdf 60 page image

Link Functions (Q-Link / VIERA Link)60VIERA Link “ Control™”Enjoy additional HDMI Inter-Operability with Panasonic products which have “HDAVI Control” function.This TV supports “HDAVI Control 5” function.Connections to the equipment (DIGA Recorder, HD Video Camera, Player theatre, Amplifier, etc.) with HDMI and SCART cablesallow you to interface them automatically (p. 57, 58).These features are limited to models incorporating “HDAVI Control” and “VIERA Link”.tSome functions are not available depending on the equipment’s version of HDAVI Control. Please confirm the connectedequipment’s version of HDAVI Control.tVIERA Link “HDAVI Control”, based on the control functions provided by HDMI which is an industry standard known as HDMICEC (Consumer Electronics Control), is a unique function that we have developed and added.As such, its operation with other manufacturers’ equipment that supports HDMI CEC cannot be guaranteed.tPlease refer to individual manuals for other manufacturers’ equipment supporting VIERA Link function.tAbout applicable Panasonic equipment, consult your local Panasonic dealer.PreparationstConnect the equipment supporting VIERA Link.tVIERA Link connection (p. 57, 58)tUse fully wired HDMI compliant cable. Non-HDMI-compliant cables cannot be utilized.Recommended Panasonic’s HDMI cable part number :t RP-CDHS15 (1.5 m) t RP-CDHS30 (3.0 m) t RP-CDHS50 (5.0 m)tUse fully wired SCART cable.tSet up the connected equipment. Read the manual of the equipment.tFor optimal recording, the settings of the recorder may need to be changed. For details, read the manual of the recorder.tDownload preset - channel, language, country / region settings “Preset download” (see below)tSet [VIERA Link] [On] in the Setup Menu [VIERA Link] (p. 30)tSet up the TVAfter connection, turn the equipment on and then switch the TV on.Select the input mode to HDMI1or HDMI2 (p. 23), and make sure that an image is displayed correctly.This setup should be done each time when the following conditions occur :t for the first timet when adding or reconnecting equipmentt when changing setupFeatures availablePreset downloadChannel, language, country / region settings can be downloaded to the recorder.tDVB-C channel settings cannot be downloaded.tTo download settings[Download] (p. 30) or [Auto Setup] (p. 35) or “Auto Setup” - when first using the TV (p. 12, 13)Easy playbackAutomatic input switching - When the connected equipment is operated, input mode is switched automatically. When it isstopped operating, input mode is returned.Power on linkSet Power on Link [On] in the Setup Menu to use this function [Power on Link] (p. 30)When the connected equipment starts playback or direct navigator / function menu for the equipment are activated, the TV isautomatically turned on. (Only when the TV is in Standby mode.)Power off linkSet Power off Link [On] in the Setup Menu to use this function [Power off Link] (p. 30)When the TV is set to Standby mode, the connected equipment is also automatically set to Standby.tThis function will work even if the TV enters Standby mode automatically by auto power standby function.