Using TV Guide●Viewing19Other useful functions■ (Operate whilst viewing TV Guide)View advertisementEnter your postcode when using this function for the first time“Postcode” in “GUIDE Plus+ Settings” (p. 33)If you have already entered your postcode in “Auto Setup” - when first using the TV (p. 12), you do not have toenter again.If you enter an incorrect postcode for your area, or no postcodes are entered, advertisement may not bedisplayed correctly.Display advertisement information To change advertisements■To return to TV Guide■ OPTIONor RETURNOPTION To display the latest advertisement, you will need to●update the information.To update the information continuously, the TV must beleft in Standby mode at night.NoteSome advertisements are for future programmes.●In this case it is possible to use the Guide link recording function (p. 20).The advertisements displayed on the TV Guide are sent from the GUIDE Plus+ system so that they cannot be●deleted manually or will not be lost even when the TV is turned Off with Mains power On / Off switch.Watch the programmeSelect the currentprogramme or channelSelect “View” (DVB mode)(TV screen)selectaccessViewEastender19:30- 20:00Timer ProgrammingTimer Programming● see belowselectwatchView details of the programme (DVB mode)Select the programme View detailsselect Wed 24/10/200710:46Timer Programming RETURNEXITWednesday, 24 October 2007DIY SOSBBC ONE20:00 - 20:30, 30 min.TV Guide: LandscapeReturn to listDetailsTo return to■the start pageTimer Programming (DVB mode)Select the forthcoming programme to output to external recorderselectsetTimer Programming Wed 15/10/08 18:50Select timerEdit timerRETURNDelete Timer offEXIT0 9Page up1/1Page down1D BBC117/10 FR 18:00 20:00 120 OffDate Start End min.3D ITV1Freshly Squeezed Extra18/10 SA 21:30 22:30 60 Off--- --/-- --:-- --:-- --- ------ --/-- --:-- --:-- --- ------ --/-- --:-- --:-- --- ---D ITV1Freshly Squeezed Extra--/-- --:-- --:-- --- ---S/P---STTLChannel NameNo.InfoGuide(Timer Programming screen)Orange Timer LED (Blinking during timer active)●Timer LED will turn on if Timer Programming is set.Timer LEDNoteWhile recording, you cannot watch any other channels except the one●being recorded.When recording programmes, you must make the proper settings on the recorder connected to the TV.●If a compatible recorder with Q-Link or similar technologies is connected to the TV (p. 54) and the“Link Settings” (p. 32) are completed, no setting of the recorder is required.Also read the manual of the recorder.If you select the current programme, a screen asking you to confirm whether you wish to watch or record it●will appear. Select “Timer Programming” to record from the time you finish the Timer Programming setting.To check / change / cancel a■Timer Programming event“Timer Programming” (p. 47)To return to TV Guide■ RETURN