Panasonic WH-MDC05F3E5 Service Manual

Also see for WH-MDC05F3E5: Design handbook Service manual Service manual Operating instructions

Contents

Panasonic WH-MDC05F3E5 Service Manual Manual pdf 66 page image

6612.11 Sterilization Mode Purpose:o To sterilize water tank by setting the required boiling temperature. Control start condition:o Tank connection menu is set to YES by control panel.o Sterilization menu is set to YES by control panel.o Sterilization signal received from control panel by timer. Control stop condition:o After sterilization timer completed oro After 4 hours of operation since sterilization function starts. Control content:o Once the sterilization function is enable, set the target sterilization set temperature.o Booster heater will allow to ON during solar SET condition. Booster heater OFF Temp = Sterilization set temperature +0°C Booster heater ON Temp = Sterilization set temperature -7°Co Sterilization timer which set by control panel will start count after tank achieve sterilization set temperature.o Target tank temperature will set back to normal tank set temperature.* Tank heater control is not affected by solar pump when solar priority set.12.12 Quiet Operation Purpose:o To provide quiet operation compare to normal operation by reduces outdoor unit noise. Starting condition:o When quiet button is presses.o When quiet is request to ON by weekly timer. (Refer to control panel) When any of above mentioned condition is achieved, this control is activated.New target FM speed = Present target FM speed – 80 rpmMinimum target FM speed = 200 rpm Cancellation condition:o Cancel by pressing quiet button.o Stop by OFF/ON buttono When quiet is request to OFF by weekly timer.