Panasonic WJ-DC108AD Operating Instructions Manual

Also see for WJDC108AD - DATA CONVERTER: Operating instructions

Contents

Panasonic WJ-DC108AD Operating Instructions Manual Manual pdf 6 page image

-4-POWERONOFFData Converter WJ-DC ADSWITCHPROTECTERn Front View1. Power Switch (POWER ON/OFF)This switch is used to turn the Data Converter powerOn or Off.The indicator lights up when the power is turned on.Switch Protector (Standard Accessory)To prevent that the power of this appliance is turnedoff accidentally, install the supplied switch protectoras shown below.2. RS485 Address Switches (RS485-1, RS485-2)These switches are used to set the camera address-es connected to the RS485 Terminal.Up to 1 024 addresses can be set in the system.3. VD2/Cable Compensation Switches (CH1 - CH8)These switches are used to set the most suitableposition of the cable-loss compensator and to turnon and off the VD2 (Sync signal) for the camerasconnected to the CAMERA IN connectors.4. Camera Address Switches (CH1 - CH8)These switches are used to set the camera address-es connected to the CAMERA IN connectors.Up to 1 024 addresses can be set in the system.MAJOR OPERATING CONTROLS AND THEIR FUNCTIONSSWITCHPROTECTOR