Panasonic WJ-GXE900 Operating Instructions Manual

Also see for WJGXD900 - MPEG2 DECODER: Brochure

Contents

Panasonic WJ-GXE900 Operating Instructions Manual Manual pdf 44 page image

44VIDEO pagePerform the settings for the VIDEO IN connectorsrespectively. The numbers of "CH" are the number of theVIDEO IN connectors respectively.Note: Click the [SET] button to save the changedsettings. Otherwise, the changed settings will not besaved.■ Item DescriptionsCAMERA No.Enter a number of the desired camera whose pictureis to be displayed on the monitor.1 to 99999 are available for the "CAMERA No.".The default settings of the "CH1", "CH2", "CH3" and"CH4" are 1, 2, 3 and 4 respectively.CAMERA TITLEEnter up to 16 alphanumeric characters to bedisplayed on monitor screen as a camera title.The default settings of the VIDEO IN 1 - 4connectors are 1, 2, 3 and 4 respectively.DESTINATION IP ADDRESS/DESTINATION PORT No.The "DESTINATION IP ADDRESS" and the"DESTINATION PORT No." should be the samevalues entered for the "RECEIVING IP ADDRESS"and the "RECEIVING PORT No." of the decoder.If they are not the same, pictures cannot bedisplayed on monitors connected to the decoder.Depending on the setting for the "DESTINATION IPADDRESS", the streaming method will be eithermulticast or unicast.1024 to 65535 are available for the "DESTINATIONPORT No.".The default settings of the "DESTINATION IPADDRESS" and the "DESTINATION PORT No." for"CH1", "CH2", "CH3" and "CH4" are as follows (formulticast).CH1: 239.192.0.1/50000CH2: 239.192.0.2/50000CH3: 239.192.0.3/50000CH4: 239.192.0.4/50000NotesWhen using multicast transmissionAll of the "DESTINATION PORT No." should be thesame if multicast IP addresses (224.0.0.0 to239.255.255.255) are assigned to the"DESTINATION IP ADDRESS".When using unicast transmission• The "DESTINATION IP ADDRESS" should be the IPaddress of the decoder receives streaming video andaudio data.• Each "DESTINATION PORT No." should be differentdepending on the video input channels.SETTINGS MENUS OF THE ENCODER