Panasonic WJ-ND400K Setup Instructions

Also see for WJ-ND400K: Operating instructions Manual Specification Setup instructions Specification sheet

Contents

Panasonic WJ-ND400K Setup Instructions Manual pdf 48 page image

48■ FTP transmission by periodic timerSelect "On" or "Off" (default) to determine whether ornot to send images to the FTP server periodically.When "On" is selected, configure the settings on the"FTP" page. (Page 58)■ FTP image transmission by alarmSelect "On" or "Off" (default) to determine whether ornot to send images from an alarm camera to the FTPserver at an event occurrence.When "On" is selected, configure the settings on the"FTP" page. (Page 58)■ Alarm message*3Select "On" (default) or "Off" to determine whether ornot to display the pop-up window that notify of anevent occurrence with a message on a PC for manage-ment.■ Panasonic alarm protocol*3Select "On" or "Off" (default) to determine whether ornot to notify of an event occurrence to a PC.Note:• Refer to page 69 for further information on how toset destination addresses.• The dedicated software*2 is required for a PC to dis-play received information.■ Alarm mail*3Select "On" or "Off" (default) to determine whether ornot to send an alarm mail at an event occurrence.Refer to page 60 for information on how to configurethe settings to use the mail function such as the set-tings of the mail server address and the destination mailaddresses. Refer to page 93 for further informationabout contents of the alarm mail.*1 The end time should be at least 15 minutes laterthan the start time.*2 Refer to the "readme.txt" on the provided CD-ROMabout the dedicated software.*3 Even when "Off" is selected, the alarm messagedisplay, Panasonic alarm protocol notification andalarm mail notification will be performed at erroroccurrence.External recordingIt is possible to start and stop recording using the con-nected external switch. To record using the externalswitch, it is necessary to assign a program to a timezone when the external switch is to be used.Refer to the installation guide for further information onhow to connect an external switch.When two or more recording schedules (Mon - Sun,Daily, Ext.) are overlapped, the priorities of the record-ing schedules are as follows.Ext. > Mon - Sun > DailyImportant:• Recording will not be performed even when theexternal switch is turned on if it is in the time rangewhich no program is assigned. It is recommendedto set the time range of the program for the externalrecording longer.Special daysThe timetables of a day of the week can be assigned tospecial days. Time tables for special days can be setfor up to 30 days.When two or more recording schedules (Mon - Sun,Daily, Ext., Special day) are overlapped, the priorities ofthe recording schedules are as follows.Ext. > Special day > Mon - Sun > Daily1 Click the [Schedule] button.2 Click the [Special day] tab.The "Special day setup" page will be displayed.3 Select date and the day of the week to be set asspecial day.4 Click the [Set] button.