59The settings relating to the display of the main monitor, the live monitor connected to the recorder and the monitor of the PC con-nected via a network are configured on the setup menu - the "Advanced setup" menu - the "Monitor" page.The settings relating to image switching such as multiscreen display and sequence display of live images are also configured onthis page.The "Monitor" page has [Main monitor], [Live monitor] and [Advanced setup] tabs.Set up the main monitor [Main monitor]Perform settings relating to the main monitor display such as the display position of the camera title.Configure the settings relating to monitors [Monitor]■ Camera title[Display]Determine whether or not to display the camera title on themain monitor.On: Displays the camera title.Off: Does not display the camera title.Default: On[Position]Select the position to display the camera title on images.L-Upper/ L-Lower/ R-Upper/ R-LowerDefault: R-Upper[Camera title]Enter a camera title to display for each camera using the on-screen keyboard (☞ page 36)Set up the live monitor [Live monitor]Set up the live monitor by selecting the camera images to display, the image display duration, etc.■ Live sequenceSet the display sequence for camera images (image switch-ing).[Duration]Set the interval (duration) for switching camera images.10 s/ 15 s/ 30 sDefault: 10 s[Camera selection]Select the cameras to be included in the sequence display.Mark the checkbox next to the desired camera. The selectedcameras will be displayed in numerical order.[Secret view]This is a function that skips camera images displayed with asingle screen display on the main monitor when displayingwith the sequential display on the monitor for live images.Determine whether or not to set up secret view.On: Enables the secret view function.Off: Disables the secret view function.Default: OffNote:• The image on the live monitor may momentarily go blackwhen images are switched on the main monitor.