Panasonic WJ-PR204 Operating Instructions Manual

Panasonic WJ-PR204 Operating Instructions Manual Manual pdf 47 page image

5.2 Using the Maintenance Screen5.2.1 Confirming the coaxial - LAN converter’s StatusYou can confirm the information in the table below, such as the firmware version, MACaddress of the coaxial - LAN converter, and the connection status of other coaxial - LANconverters on the [Status] screen.1. Access the maintenance screen of the coaxial - LAN converter.2. Click [Status].WJ-PR204The screen shown above is the maintenance screen of the receiver side unit.IMPORTANT• The screen shown here depicts the screen shown when accessing a receiverside unit. The screen displayed for the receiver side unit and camera side unit isdifferent. [PLC link status] and [MAC address of the Master] are displayed on thecamera side unit’s screen.Items DescriptionBoot version Displays the coaxial - LAN converter’s boot version.Firmware version Displays the coaxial - LAN converter’s firmware version.Operation mode Displays the coaxial - LAN converter type (receiver side unit orcamera side unit). Camera side units are displayed as [Terminal],and receiver side units are displayed as [Master].MAC address of thePLC adaptorDisplays the MAC address of the connected coaxial - LANconverter.Other master Indicates whether other receiver side units exist on the network.If other receiver side units exist on the network, [Detected] isdisplayed, if they do not exist, [Not Detected] is displayed.Communication performance may be affected if other receiver sideunits are detected.Operating Instructions 475 Maintenance Screen of coaxial - LAN converter