Panasonic WJ-PR204 Operating Instructions Manual

Panasonic WJ-PR204 Operating Instructions Manual Manual pdf 7 page image

1.1 Main FeaturesTo the receiver side, a 4ch model has been newly added in addition to the 1chmodel.Up to 4 network cameras can be connected and used on a single receiver side unit.PR204 Now we have a true space-saving system.Power over Ethernet Plus (PoE+) readyThe coaxial - LAN converter is compliant with PoE+ standards (IEEE802.3at) andPoE+ cameras can be connected and used *1 .Use over long distances PR201The coaxial - LAN converter can be used for distances of up to 300 m (984 feet) forPoE+ connections and 500 m (1,640 feet) for PoE connections, and 2.0 km (6,560 feet)for non-PoE+ connections. (When used with RG-6/U coaxial cable, and the loopresistance is below 4 /100 m {328 feet} without additional joint parts.)High-speed transmissionThe coaxial - LAN converter is capable of transmission speeds of 35 Mbps or over forTCP *2 , and 45 Mbps or over for UDP connections. *2 (When used with RG-6/U coaxialcable, and for distances under 2.0 km (6,560 feet) PR201 , 500 m (1,640 feet)PR204 ).No setup requiredConnections can be established by simply connecting the coaxial cable to the coaxial- LAN converter.*1 There are limitations on the combinations of the cameras to be connected, the type of power supply andtransmission range to the receiver side units. Please see page 30 for details. For information on networkcameras recommended by Panasonic, see the Panasonic support site(http://security.panasonic.com/pss/security/support/info.html).*2 Transmission speed is the speed of transmission between the receiver side unit and the camera side unit.Values may vary depending on the condition of the coaxial cable (for example, as the cable deteriorates overtime), network conditions, etc.Operating Instructions 71 Preface