Panasonic WJND400 - NETWORK DISK RECORDER Operating Instructions Manual

Also see for WJ-ND400/1000: Product catalog Reference Manual Specification Quick reference guide

Contents

Panasonic WJND400 - NETWORK DISK RECORDER Operating Instructions Manual Manual pdf 17 page image

About operating windows17The camera can be controlled (pan/tilt, zoom, focus, brightness, preset, auto mode) when the live image is from a camera that can pan and tilt.Some camera operations cannot be done depending on the type of camera connected.(1) [Zoom] boxClick [-] or [+] to adjust the zoom. Click [x1] to return thezoom to normal.(2) [Focus] boxClick [Near] or [Far] to adjust the image focus.Click [Auto] to adjust the focus automatically (auto focus).(3) [Auto mode] boxSelect the camera's auto mode function. Click [V] and selectan auto mode function (auto track, auto pan, presetsequence, sort, patrol), and then click [Start]. Click [Stop] toturn off the auto mode function.(4) Control pad/buttonsClick the buttons on the control pad to move the camera tothe direction of the button (pan/tilt). Also, click in the controlpad to adjust the horizontal/vertical position (pan/tilt) of theimage. The pan/tilt movement increases if a clicked pointgets farther from the center point of the control pad.(5) [Brightness] boxClick [-] (Dark) or [+] (Bright) to adjust the lens iris(brightness).Click [Reset] to reset the brightness.(6) [Preset] box[Go] buttonThe camera moves to the pre-registered preset position.Click [V], select a preset number ([Home], 1 to 256), and thenclick [Go]. To perform the preset operation, register thecamera's preset positions in advance.[Set] buttonRegister preset positions that specify the direction of thecamera. Move the camera to the direction to register, click[V], select a preset number (1 to 256), and then click [Set]([Home] cannot be registered.).[CAM] tab(2)(1) (3) (4) (5)(6)