Panasonic WJND400 - NETWORK DISK RECORDER Operating Instructions Manual

Also see for WJ-ND400/1000: Product catalog Reference Manual Specification Quick reference guide

Contents

Panasonic WJND400 - NETWORK DISK RECORDER Operating Instructions Manual Manual pdf 20 page image

Playback20Operations during playbackFunction Button OperationPlayback/reverse playback • Plays recorded images.• Plays recorded images in reverse.Note:• Clicking the [Play] or [Reverse play] button while recording at a low ratemay not play the images being recorded either forward or reverse.Stop • Clicking during playback stops playback and displays the live image.Pausing • Clicking during playback pauses play back.• Clicking while paused restarts playback.Frame play/reverse frameplay• Clicking [NEXT IMAGE] during play or pause plays one frame at a time inforward, or pauses.• Clicking [PREV IMAGE] during play or pause plays one frame at a timebackward, or pauses.Note:• Not all recorded images are displayed if the image being played back isMPEG-4. Single frame reverse occurs at the refresh rate set for thecamera.Skip/reverse skip • Clicking [NEXT RECORD] starts playing preceding images.• Clicking [PREV RECORD] starts playing previous images.• If the skip destination does not exist, playback continues. In this case, theplay time may go back one minute.Fast playback/fast reverseplayback• Each time the [FF] button is clicked, the speed changes, Step 2 (4x), Step3 (8x), Step 4 (16x), Step 5 (32x), Step 6 (48x), Step 7 (96x).• Each time the [REW] button is clicked, the reverse speed changes, Step 2(4x), Step 3 (8x), Step 4 (16x), Step 5 (32x), Step 6 (48x), Step 7 (96x).• Clicking the [PLAY] or [REV PLAY] button during fast forward or reversechanges the speed to normal speed.Note:• Not all recorded images can be displayed if the image being played backis MPEG-4. Fast forward/reverse is played back at the refresh cycle seton the camera.Skip to the latest image [Go to last] • Skips to the latest image and starts playback. The default setting is to skipto 30 seconds before the most recent image.The settings for skipping to the latest image are shown below.5s/10s/30s/1min/5minFor information about settings, contact your system administrator.Note:• Clicking the [Go to last] button while recording at a low rate, the latestimage being recorded may pause or may not be displayed.