9 The copier should not be installed in areas with thefollowing conditions:C Extremely high or low temperature and humidity.Ambient conditionsTemperature: 50°F – 95°F (10°C – 35°C)Relative humidity: 45% – 85%C Where temperature and humidity can changerapidly, causing condensation.C Direct exposure to sunlight.C Directly in the air conditioning flow.C In areas of high dust concentration.C In areas of poor ventilation.C In areas with chemical fume concentration.C In areas with extreme vibration.C With unstable or uneven conditions (floors, etc.). The maximum power consumption is 1.5 kW.A properly wired (grounded), dedicated, 15A, 120 VAC outlet is required. Do not use an extensioncord.The power cord on this equipment must be used to disconnect the main power. Please ensurethat the socket outlet is installed near the equipment and is easily accessible.FCC WARNING For U.S.A.FCC WARNING:This equipment has been tested and found to comply with the limits for a Class A digital device,pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonableprotection against harmful interference when the equipment is operated in a commercialenvironment. This equipment generates, uses, and can radiate radio frequency energy and, ifnot installed and used in accordance with the instruction manual, may cause harmfulinterference to radio communications. Operation of this equipment in a residential area is likelyto cause harmful interference in which case the user will be required to correct the interferenceat his/her own expense.The user could lose the authority to operate this equipment if any unauthorized changes ormodifications are made to this equipment.InstallationPrecautionsCTHIS PRODUCT CONTAINS A LITHIUM BATTERY. DANGER OF EXPLOSION IFBATTERY IS INCORRECTLY REPLACED.REPLACE ONLY WITH THE SAME OR EQUIVALENT TYPE. DISPOSE OF USEDBATTERIES ACCORDING TO THE INSTRUCTIONS OF YOUR LOCAL SOLID WASTEOFFICIALS.CAUTIONBefore Starting