Panasonic WORKIO DP-135 User Manual

Also see for DP-1810F: Operating instructions Operating instructions Service manual Technical guide Operating instructions

Panasonic WORKIO DP-135 User Manual Manual pdf 23 page image

22NOTE C An incorrect exposure may occur when there is a black line at the edge ofthe original or an image which the copier interprets as a black pattern in theSkyshot mode.C An incorrect position detection of the original may occur when a strong lightshines onto the glass during Skyshot mode. Other FeaturesSkyshot Mode Skyshot allows copying a manuscript without generating dark borderseven if the platen cover or ADF is opened.Skyshot mode eliminate dark borders around the originals, and is especially convenient forcopying small-sized originals like bank checks or documents with unusual shapes (round, oval,etc.). These documents can be reproduced without generating any unnecessary black areassimply by making a copy with the cover open.Two types of Skyshot modes can be selected;Digital Skyshot Mode : The scanning area (size) is not pre-determined.Manual Skyshot Mode : The scanning area (size) is pre-registered into memory (M1 and M2) inadvance. (See page 29) Digital Skyshot Mode1Place the Original onthe platen (Opening thePlaten Cover/ADF)Note:The default setting of Digital Skyshot Mode is “NORMAL”. In this setting, the unit scans once.If there are black areas around the borders in the copies, set the Digital Skyshot Mode to“QUALITY” to soften the dark borders. In this setting, the unit scans twice.# Press the 2 key to select COPIER SETTINGS.$ Press the SET key.% Press 6 and SET key to select DIGITALSKYSHOT.& Press 1-3 key to select the Digital Skyshot Mode.1: OFF NONE2: NORMAL Default setting (usually select thismode).3: QUALITY For better definition, select theQuality mode.( Press the SET key.) Press the Reset key.FUNCTION MODE (1-2)ENTER NO. OR ∨ ∧2:COPIER SETTINGSPRESS SET TO SELECTCOPIER PARAM. (00-14)ENTER NO. OR ∨ ∧06 DIGITAL SKYSHOT2:NORMAL3PressStart Key2Number ofCopies