Panasonic WORKIO DP-135 User Manual

Also see for DP-1810F: Operating instructions Operating instructions Service manual Technical guide Operating instructions

Panasonic WORKIO DP-135 User Manual Manual pdf 29 page image

28FunctionGeneral Functions for Key OperatorNo. Modes InitialSettingFunctionNOTESelects the Control Panel reset time.C OFF, 30 sec, 1 min., 2 min., 3 min.,4 min.Selects the message language of the display.C A-ENGLISH, C-FRENCH, SPANISHAUTO RESET TIMELANGUAGE DEFAULT05 Sets the paper tray for special paper (ex: colored).C NONE, TRAY 1, TRAY 2, BYPASSSPECIAL TRAY 1 NONESets the Energy Saver mode and time.C INVALID, ENERGY-SAVER, SLEEPEnergy save mode timer : 1-120 minutesSleep mode timer : 1-120 minutesENERGY SAVER MODE1 min.SLEEPA-ENGLISHKEY/TOUCH BEEP Sets the panel touch sound.C OFF, SOFT, LOUDSOFT01020409Consultyourservicetechnician.Monitors copy usage of each department.(1) TOTAL COUNTER(2) DEPT. COUNTER(3) DEPT. COUNTER LISTDEPT. COUNTER MODE∗ Sets the IP Address assigned to your machine.C 3 digit × 4 (Use the MEMORY IN key toenter the "." between each set of 3-digitnumbers)TCP/IP ADDRESS∗ Sets the Subnet Mask.C 3 digit × 4 (Use the MEMORY IN key toenter the "." between each set of 3-digitnumbers)TCP/IP SUBNET MSK∗ Sets the Subnet Mask.C 3 digit × 4 (Use the MEMORY IN key toenter the "." between each set of 3-digitnumbers)TCP/IP G/W ADDR.14222324C It is necessary to input the Key Operator ID code before changing items onthis page.C The Special Tray 1 and 2 are not auto-selectable in the switching mode.∗ Not available for plain copier, but will be available when installing optionsfor advanced functions. (See page 50)Sets the paper tray for special paper.C NONE, TRAY 1, TRAY 2, BYPASSSPECIAL TRAY 2 NONE06Sets the sound when put paper(s) on bypasstray.C 1: INVALID 2: VALIDBYPASS SET BEEP INVALID10Sets the sound when put paper(s) on ADF.C 1: INVALID 2: VALIDORIG.SET BEEP ADF VALID11Prints list containg Current Setting andStandard Setting.COPY SETTING LIST25ContactyourNetworkAdminstrator.ContactyourNetworkAdminstrator.ContactyourNetworkAdminstrator.