Panasonic WV-BP550 Operating Instructions Manual

Also see for WVBP550 - CCTV CAMERA: Operating instructions Specifications

Contents

-10-Installation of Auto Iris Lens ConnectorInstall the lens connector (YFE4191J100) when using avideo drive ALC lens.The installation should be made by qualified ser-vice personnel or system installers.(1) Cut the iris control cable at the edge of the lensconnector to remove the existing lens connectorand then remove the outer cable cover as shownin the diagram below.The pin assignment of the lens connector is as fol-lows:Pin 1: Power source; +9V DC, 50mA Max.Pin 2: Not usedPin 3: Video signal; 1.3 V[p-p]/40 kΩPin 4: Shield, groundPin 3Pin 4Pin 2RibPin 1Note: When the iris control cable is too thick tolock the connector cover with the connectorbase, cut off the rib on the connector.(Select VIDEO for LENS DRIVE of the CAMSET UP menu.)(2) After connection, assemble the lens connector asfollows.AutomaticIris LensIris ControlCableConnectorHeatShrinkableTubesConnectorCover