Panasonic WV-BP550 Operating Instructions Manual

Also see for WVBP550 - CCTV CAMERA: Operating instructions Specifications

Contents

-16-Left ButtonSet SwitchRight ButtonDown ButtonUp ButtonUp Button ( ): This button is used to move thecursor upwards. Use this button toselect an item or adjust the para-meters.Down Button ( ): This button is used to move thecursor downwards. Use this but-ton to select an item or adjust theparameters.Right Button ( ): This button is used to move thecursor to the right. Use this buttonto select or adjust the parametersof the selected item. The parame-2. SETUP OPERATIONThis camera utilizes a user setup menu (CAM SET UP)that is displayed on the monitor.To set items on the CAM SET UP menu, use the follow-ing buttons on the side panel.ter changes each time this buttonis pressed.Left Button ( ): This button is used to move thecursor to the left. Use this buttonto select or adjust the parametersof the selected item. The parame-ter changes each time this buttonis pressed.Set Button ( ): This button is used to set thedetermined parameter. If the itemhas its own setting menu ( indi-cates that the setting menuexists), press this button to dis-play the setting menu.• All Reset OperationAll Reset allows you to reset all setup menu items tothe factory settings if you are unsure about the correctsettings. Proceed as follows:(1) Make sure that the CAM SET UP menu is not dis-played (a camera picture is displayed).(2) While pressing both and , press for afew seconds. The words ALL RESET momentarilyappear on the monitor.At this time all adjustments and parameters arereset to the factory default settings.