10Camera operation setting [CAMERA SETUP]The following settings related to camera actions can be configured on the "CAMERA SETUP"screen displayed from the top screen. Refer to page 5-6 for how to call up the screen.The settings configured on the "CAMERA SETUP" screen will be saved as a scene file.1 Register a scene file [SCENE1/SCENE2]It is possible to register 2 patterns of scene file. When different settings are to be applied betweenday and night, SCENE1 can be applied in the daytime and SCENE2 at night. Change between thescene files can be made by shortcut operation. ( page 27) "SCENE1" is set as the default setting.Step 1After confirming that "SCENE1" is selected, configure the settings of "ALC/ELC" through "VMD".( page 11-18)To change the scene files, go to step 2.Step 2Move the cursor to "SCENE1" and use the [rIghT] or [LEfT] button to select "SCENE2".→ The screen changes and displays “SCENE2”.Step 3To configure the settings of "SCENE2" using the settings of "SCENE1", press the [SET] button aftermoving the cursor to "COPY(SCENE1)".→ The settings of "SCENE1" will be copied to "SCENE2".Step 4Edit the settings to be changed.The number displayed at the right side of the title oneach setting screen indicates a scene file number.Step 5Move the cursor to "SCENE2" and press the [rIghT] or [LEfT]button to select "SCENE1" to resume normal operation.**CAMERA SETUP**RET TOP ENDSCENE2VMDALC/ELC ALCSHUTTER OFFAGC ON(HIGH)SENS UP OFFWHITE BAL ATW1DNR HIGHCOPY(SCENE1)D&N(ELE) OFF*)**ALC CONT**(1)OFFScene filenumberBLCBACK LIGHT COMPABSLEVEL . I .. ... 0- +MASK SETRET TOP ENDONScreen when "SCENE1" is selected Screen when "SCENE2" is selectedRET TOP END**CAMERA SETUP**RET TOP ENDSCENE2VMDALC/ELC ALCSHUTTER OFFAGC ON(HIGH)SENS UP OFFWHITE BAL ATW1DNR HIGHCOPY(SCENE1)D&N(ELE) OFF**CAMERA SETUP**SCENE1VMD OFFALC/ELC ALCSHUTTER OFFAGC ON(HIGH)SENS UP OFFWHITE BAL ATW1DNR HIGHD&N(ELE) OFF