Panasonic WV-CF344 Operating Instructions Manual

Also see for WV-CF344 Series: Operating instructions Features & specifications

24K Flaw compensation [PIX OFF]Flaws of pixel in the displayed camera image are corrected. Up to 16 points can be corrected.Follow the procedure below.Step 1Move the cursor to "PIX OFF" and press the [SET] button.→ The "PIX OFF" screen appears.Step 2Select a number (1 to 16) with which a pixel compensation point is registered and press the[SET] button.→ The pixel compensation positioning screen appears.Step 3Use the [UP], [DOWN], [RIGHT], and [LEFT] buttons to move the crosshair cursor to the center ofthe flaw to be corrected and press the [SET] button.→ The flaw is corrected and the pixel compensation point is registered. The "PIX OFF" screenappears again. An asterisk "*" is attached at the right side of the number when registration iscompleted. The coordinate is expressed in figures.Note:• To clear the registered pixel compensation point, move the cursor to “1” of the right of "DEL"screen, use the [RIGHT] and [LEFT] buttons to select the number with which the target pixelcompensation point is registered and press the [SET] button. The registered pixel compensa-tion point is cleared, and an asterisk "*" at the right side of the number disappears.L Communication setting [COMMUNICATION]The required communication configuration is performed to use this unit integrated into the sys-tem with a receiver.COAX (RCV): Select COAX (RCV) when using our decoder (e.g. WV-RC150).COAX (default): Select this setting when not using any receiver.** PIX OFF **1 2 3 45 6 7 89 10 11 1213 14 15 161DEL000 000"SPECIAL SETUP" screen "PIX OFF" screen Pixel compensation positioning screenRET TOP ENDRET TOP END**SPECIAL SETUP**I 1603215I0IPUSH SWCHROMA GAINAP GAINPEDESTALHUEPIX OFFCAMERA RESETSER.NO. XXXXXXXX+-