Panasonic WV-CF344 Operating Instructions Manual

Also see for WV-CF344 Series: Operating instructions Features & specifications

135 Electronic sensitivity enhancement setting [SENS UP]Use of the electronic sensitivity enhancement function increases the light sensitivity of theCCD, and accordingly the image becomes brighter. The magnification is unchanged for selec-tion of FIX, and the magnification is automatically adjusted in accordance with the illuminanceof a photographic subject for selection of AUTO. The magnification of the electronic sensitivityis selectable from the following.OFF (default)/X2 AUTO/X4 AUTO/X6 AUTO/X10 AUTO/X16 AUTO/X32 AUTO/OFF/X2 FIX/X4FIX/X6 FIX/X10 FIX/X16 FIX/X32 FIX/X64 FIX/X128 FIX/X256 FIX/X512 FIXNote:• When "ALC/ELC" is set to "ELC" or "ALC+", only the AUTO mode is enabled.• When "SHUTTER" is set to options other than "OFF", the electronic sensitivity enhancementsetting cannot be performed and "---" appears.• When the magnification of "SENS UP" is increased, the screen becomes coarser, more whitish,or more flawed. However, this phenomenon is normal.6 White balance setting [WHITE BAL]The white balance adjustment is selectable from the following.ATW1 (default): Activates the automatic color temperature tracking mode.The camera continuously check the color temperature of the light source andautomatically adjusts the white balance. The adjustment of the color tempera-ture ranges from approx. 2,700 K to 6,000 K.ATW2: Activates the sodium lamp automatic color temperature tracking mode. The cameraautomatically achieves an optimal white balance under the sodium lamp. The adjust-ment of the color temperature ranges from approx. 2,000 K to 6,000 K.• If the situation meets one of the followings, color may not be accurately reproduced.• The subject is mostly highly-colored.• The photographic scene is under the bright blue sky or at nightfall.• The illumination of the light illuminating the subject is insufficient.When "AWC" is selected, follow the steps below to adjust the white balance.Step 1Set "WHITE BAL" to "AWC" and press the [LEFT ] button to change to "AWC → PUSH SET"."CAMERA SETUP" screen**CAMERA SETUP**RET TOP ENDSCENE1VMD OFFALC/ELC ALCSHUTTER OFFAGC ON(HIGH)SENS UP OFFWHITE BAL AWC →PUSH SETDNR HIGHD&N(ELE) OFF