Panasonic WV-CS650 Operating Instructions Manual

Contents

- 16 -l Dwell Time Setting• Move the cursor to DWELL TIME and set a dwell time by movingthe joystick to the left or right. Dwell time changes as follows:The letter S signifies second(s) and MIN minute(s).l Scene File Setting1. To set a scene file numberMove the cursor to SCENE FILE and select a scene file number (1to 10, or OFF) by moving the joystick to the left or right. No scenefile is selected at OFF.2. To set scene file detailsMove the cursor to a scene file number and press the CAM (SET)key. The setting menu appears.See the pages below for the setting.Shutter speed: Page 23AGC: Page 23Electronic sensitivity enhancement: Page 23White balance: Page 25Motion detector: Page 27Auto focus: Page 28PRESET NO.15*HPOSITION SETPRESET ID ONALC/MANUAL ALCDWELL TIME 2SSCENE FILE 1RET DELPreset setting menu* * SCENE FILE 1 **SHUTTER OFFAGC ONSENS UP OFFWHITE BAL ATWMOTION DET ONAF MODE MANUALRETScene file setting menuPRESET NO.15*HPOSITION SETPRESET ID ONALC/MANUAL ALCDWELL TIME 2SSCENE FILE 1RET DELPreset setting menu2S 3S 5S 10S 30S 1MIN 2MIN 3MIN 4MINl To return to the PRESET NUMBER SET Menu• Move the cursor to RET and press the CAM (SET) key. ThePRESET NUMBER SET menu appears with the * mark on the rightof the preset position number.PRESET NO.15*HPOSITION SETPRESET ID ONALC/MANUAL ALCDWELL TIME 2SSCENE FILE 1RET DELPreset setting menul To return to the setup menu• Move the cursor to RET and press the CAM (SET) key. * PRESET NUMBER SET *1* 2* 3* 4*5* 6* 7* 8*9* 10* 11* 12*13* 14* 15*H 1617 18 19 20*21 22 23 2425 26 27 2829 30 31 32ID:33-64 RETPRESET NUMBER SET menu