Panasonic WV-CS650 Operating Instructions Manual

Contents

- 32 -1. Remove the mounting screw (M3) from thecamera mounting angle (provided).2. Mark the mounting holes on the ceiling,using the removed camera mounting angleas a template.Marking3. Fix the camera mounting angle to the ceilingwith four screws (not provided).Caution:The installation should be strongenough to support 4 times the totalweight.Note: Be sure to protect the video andpower cables. Otherwise, the cut edgeswill damage the cables.Diecast Case3. Assemble the cameraReverse the disassembly procedure. Takecare not to cut any cables.Precautions:1. The following installation work should bereferred to qualified service personnel orsystem installers and must conform withlocal codes.2. Be sure to select a ceiling board that isstrong enough to support this camera.3. To mount the camera on any other kind ofceiling, use the optional ceiling bracket WV-Q105, WV-Q106 or WV-Q107.4. To mount the camera on the wall, use theoptional wall mount bracket WV-Q108.a. Sideway cable exitPrepare a cutout in the diecast case anddecoration cover as shown in the followingdrawing.PAL or NTSC DIP φ OFF NTSCON PALNote: The dip switch φ is not for changing NTSCto PAL or PAL to NTSC. This switch is set atfactory. Do not change the setting of thisswitch. The factory setting is ON.b. Top cable exit