- 18 -n Auto Mode Setting1. To set auto modeMove the cursor to AUTO MODE and select a mode by movingthe joystick to the left or right. Modes change as follows:*** SET UP MENU ***PRESET 1*MAPHOME POSITION 15SELF RETURN 10MINAUTO MODE AUTO PANFLIP-A-CHIP ONLOCAL/REMOTE LOCALCAMERASetup menu2. When AUTO PAN is selected, set details as follows:Move the cursor to AUTO PAN and press the CAM (SET) key todisplay the AUTO PAN setting menu. ** AUTO PAN **POSITION SET STARTENDSPEED ...I....L HENDLESS ONDWELL TIME 1SRETAUTO PAN setting menu** AUTO PAN **POSITION SET STARTENDSPEED ...I....L HENDLESS ONDWELL TIME 1SRET3. To set a panning start position and panning end positionFollow the steps below.(1) Move the cursor to POSITION SET and press the CAM (SET)key.The cursor moves to START.(2) Move the joystick to the left or right to select a panning startposition and press the CAM (SET) key.This determines the start position and the cursor moves toEND.(3) Move the joystick to the left or right to select a panning endposition and press the CAM (SET) key.This determines the end position and the cursor moves toPOSITION SET.4. To set a panning speedMove the cursor to SPEED, and move the joystick to the left orright to set a panning speed.The panning speed increases when the joystick is moved to theright, and decreases when it is moved to the left.Caution: If the panning range is changed after the camera has notpanned for a long time or has been panning in the same panningrange, the picture may not be clear or noise may appear. If this isthe case, pan the camera fully several times.If this does not eliminate the problem, refer servicing to qualifiedservice personnel.** AUTO PAN **POSITION SET STARTENDSPEED ...I....L HENDLESS ONDWELL TIME 1SRET** AUTO PAN **POSITION SET STARTENDSPEED ...I....L HENDLESS ONDWELL TIME 1SRETOFF SEQ SORT AUTO PAN