Panasonic WV-CS850A Operating Instructions Manual

26** ZONE NUMBER 3*/8 **PAN/TILT →PUSH SETZOOM/FOCUS →PUSH SETZONE SCALE ••••|••••SET DEL L HRETZONE setting menu** ZONE NUMBER 3*/8 **PAN/TILT →PUSH SETZOOM/FOCUS →PUSH SETU TILT D/L PAN RZONE SCALE ••••|••••SET DEL L HRETPAN/TILT setting menu2. Select a zone number by moving the joystick to the right or left,then press the CAM (SET) key.• A zone number followed by * (asterisk) indicates that the zonehas already been registered.• When a zone number having no * is selected, the picture iszoomed out fully.• When a registered zone number is selected, the cameramoves to the preset position. Note that if you move any ofPAN/TILT, ZOOM/FOCUS or ZONE SCALE in that position,the registered zone number having no * is canceled.• Zone frame appears in the centre of the screen if 3 or fewermask areas exist in that picture and if the zone number is notregistered yet.• The privacy zone setting may appear on the monitor depend-ing on the direction of the camera.• Privacy zone function will not work at start-up immediatelyafter turning power on.3. To register a new zone3-1 Move the cursor to PUSH SET on the PAN/TILT line, thenpress the CAM (SET) key.3-2 Move the joystick to adjust the pan and tilt position so that thedesired position comes into the zone frame.Note: Zone setting is not available while the zone frame disap-pears, for example the camera directs further downward fromthe 45° position.3-3 Move the cursor to PUSH SET on the ZOOM/FOCUS, thenpress the CAM (SET) key.3-4 Adjust zoom and focus, then press the CAM (SET) key.Zoom can be adjusted within the range of 1 to 10 magnifica-tions.3-5 Move the cursor to ZONE SCALE, and move the joystick tothe right or left to adjust the zone frame. Press the CAM (SET)key after the adjustment.Moving the joystick in the L direction decreases the zoneframe, and moving it in the H direction increases it. However,the aspect ratio is fixed at 3 to 4.The privacy zone setting has been completed.The menu returns to the ZONE NUMBER setting menu. If DELis selected, zone setting is released and the ZONE NUMBERsetting menu appears.** ZONE NUMBER 3*/8 **PAN/TILT →PUSH SETZOOM/FOCUS →PUSH SETZONE SCALE ••••|••••SET DEL L HRETZONE SCALE setting menu** ZONE NUMBER 3*/8 **PAN/TILT →PUSH SETZOOM/FOCUS →PUSH SETU ZOOM D/L FOCUS RZONE SCALE ••••|••••SET DEL L HRETZOOM/FOCUS setting menu** ZONE NUMBER 1*/8 **PAN/TILT →PUSH SETZOOM/FOCUS →PUSH SETZONE SCALE ••••|••••SET DEL L HRETZONE setting menu