Panasonic WV-CS850A Operating Instructions Manual

36CAMERA ID0123456789ABCDEFGHIJKLMNOPQRSTUVWXYZ().,'":;&#!?=+-*/%$ÄÜÖÆÑÅSPACEPOSI RET RESETCAM1............CAMERA ID0123456789ABCDEFGHIJKLMNOPQRSTUVWXYZ().,'":;&#!?=+-*/%$ÄÜÖÆÑÅSPACEPOSI RET RESETCAM1............** SET UP **CAMERA IDALC/MANUALSHUTTERAGCSENS UPSYNCWHITE BALMOTION DETAF MODERET SPECIAL2OFFALCOFFON(MID)X2 AUTOINTATWOFFMANUAL MCamera setting menu** ALC CONT **BACK LIGHT COMPSUPER-D2LEVELRETON••••|••••- +** ALC CONT **BACK LIGHT COMPSUPER-D2MASK SETLEVELRETOFF••••|••••- +Backlight compensation menu• The positioning of the CAMERA ID stops at the edges of thescreen.• The CAMERA ID moves faster when the joystick is kept at theright or left for one second or more.• To return to SET UP for setting other items, move the cursor toRET, and press the CAM (SET) key.3. Light Control Setting (ALC/MANUAL)1. Display SET UP on the monitor screen.If necessary, refer to Setup Menu Display on page 16 for detailson displaying the SET UP on the monitor screen.2. Move the cursor to ALC/MANUAL and select ALC or MANUAL byusing the joystick. When you select ALC, set backlight compen-sation.Note: The backlight compensation submenu associated with thismenu is described separately and should be set up afterinstalling the camera at the site and observing the actual sitepicture.3. When MANUAL is selected, quit the setup menu by pressingMON (ESC) key. Press OPEN or CLOSE key on the controller foriris adjustments.(1) ALC Mode with SUPER-D2 ON1. Press the CAM (SET) key after selecting ALC. The ALC CONTmenu appears.2. Move the cursor to the SUPER-D2 parameter and select ON.3. If you want to adjust the video output level, move the cursor to the“I” position. Adjust to the desired level by using the joystick.4. Move the cursor to RET and press the CAM (SET) key to return tothe CAM SET UP menu. (To return to the camera picture, pressthe F4 button.)