Panasonic WV-CS850A Operating Instructions Manual

41(2) Automatic White Balance Control Mode (AWC)1. Display SET UP on the monitor screen.(Refer to Setup Menu Display on page 16 for details on displayingthe SET UP menu on the monitor screen.)2. Move the cursor to WHITE BAL and select AWC → PUSH SW byusing the joystick.3. Press the CAM (SET) key to start the white balance setup. PUSHSW is highlighted to indicate that white balance is being set.4. “PUSH SW” returns to normal when balance setting is completed.5. For fine adjustment of the AWC, move the cursor to select AWCand press the CAM (SET) key to display the AWC fine adjustmentmenu on the monitor screen.6. Move the cursor to “R.”Use the joystick to obtain the optimum amount of red gain. The “I”cursor moves to the right or left.7. Move the cursor to “B.”Use the joystick to obtain the optimum amount ofblue gain. The “I” cursor moves to the right or left.8. Move the cursor to RET by using the joystick andpress the CAM (SET) key to return to SET UP.** AWC **RBRET••••|••••- +••••|••••- +AWC fine adjustment menu** SET UP **CAMERA IDALC/MANUALSHUTTERAGCSENS UPSYNCWHITE BALMOTION DETAF MODERET SPECIAL2OFFALCOFFON(MID)X2 AUTOINTAWC→PUSH SWOFFMANUAL MCamera setting menuBlue skyCloudyFineAWC10000 KBluishReddish9000 K8000 K7000 K6000 K5000 K4000 K3000 K2000 K1000 KATWHalogen lampRainyPartly cloudyFluorescentlampTungstenlampCandle