27 Auto PanThe combination camera starts a specific panning modepreset beforehand.1. Press the AUTO/B/W/PATROL STOP button.The auto panning function is activated.The picture appears on the monitor.The following functions may be also available depend-ing on the combination camera.AUTO PAN ON or functions set in the combinationcamera: Press the numeric button 1 and then press thisbutton.AUTO SORT ON: Press the numeric button 2 and thenpress this button.AUTO SEQ ON: Press the numeric button 3 and thenpress this button.RANDOM PAN ON: Press the numeric button 4 andthen press this button.For further information, refer to the Operating Instruc-tions for the combination camera.2. To stop auto pan, move the joystick. Operation of Combination CameraIt is necessary to set up the combination camera beforeoperating it. For further setup information, refer to theOperating Instructions for the combination camera (Seepage 30). You can also set it up from the Camera Setupmenu during operating the system. Moving to a Preset PositionThe combination camera is moved to a position presetbeforehand.Select a preset number using the numeric buttons, andthen press the PRESET/SET/PROGRAM PRESET button.The picture of the camera in that position appears on themonitor. Moving to the Home PositionThe combination camera is moved to the home positionpreset beforehand.Press the HOME/ESC button.The picture in that position appears on the monitor.1 2 34 67 8 905PROGRAMPRESETESCHOMESETPRESETPROGRAMPRESETSETPRESETESCHOMEB/WAUTOPATROL STOPUPL RDOWN