Panasonic WV-CW384 Operating Instructions Manual

Also see for Super Dynamic III WV-CW384: Product catalog Product catalog Brochure & specs Brochure & specs Operating instructions

Contents

Panasonic WV-CW384 Operating Instructions Manual Manual pdf 24 page image

244. To specify the ID display position:1. Select "POSI" and press the [SET] button.→ The entered camera ID will be highlighted on the screen.2. Move it into the appropriate position and press the [SET] button.→ The position is determined and the screen will return to the "CAMERA ID" menu.Note:• Keep pressing any of [LEFT], [RIGHT], [UP], or [DOWN] button for a second or more to move the camera ID faster as nec-essary.2. Light Control Mode Setting (ALC)Select a light control mode depending on the lens type mounted.ALC↓: Is applicable to the auto iris lens. "SUPER-D3" is available with this selection.2-1. ALC Mode with SUPER-D3 ONSuper Dynamic 3 Function (SUPER-D3)In the SUPER-D3 mode, more photometric weight is given to the center of the screen than to the edge where a bright backlightwould most likely be located.SUPER-D3 ON: Enables SUPER-D3 to compensate backlight automatically.SUPER-D3 OFF: Enables manual setting to compensate backlight.Notes:• When set to "ON", the available parameters for "SHUTTER" and "SENS-UP" will be limited as shown on the next page.• Set "SUPER-D3" to "OFF" when noise in a bright portion, flickerings, or color deterioration are observed.SUPER-D3 OFFNighttime DaytimeSUPER-D3 ONNighttime Daytime**ALC CONT**BACK LIGHT COMPSUPER-D3 ONLEVEL ...I...128- +RET TOP END1. Move the cursor to "ALC" and press the [SET] button.→ The "ALC CONT" menu opens.2. Select "ON" for "SUPER-D3".3. Adjust the video output level (LEVEL) by moving the "I" cursor.It may be better to adjust "LEVEL" slightly higher.