Panasonic WV-CW384 Operating Instructions Manual

Also see for Super Dynamic III WV-CW384: Product catalog Product catalog Brochure & specs Brochure & specs Operating instructions

Contents

Panasonic WV-CW384 Operating Instructions Manual Manual pdf 32 page image

32FIX: Fixes the back-focus after adjustment.5. Select "ON" or "OFF" for "SETUP-SW LOCK". The default setting is "OFF".OFF: Enables the [SET] button to open the back-focus adjustment screen while the camera picture is displayed.ON: Disables the [SET] button from opening the back-focus adjustment screen.6. To reset the back-focus to the default setting, press the [LEFT] and [RIGHT] buttons simultaneously.Important:• Select "FIX" or "PRESET" and adjust manually the back-focus when automatic adjustment is hindered by the followingconditions.1. Dirt or a water drip attached to window glassThis causes defocus on the object beyond the glass.2. Objects in low lighting conditions3. Objects extremely bright4. Flat contrast objects such as white wall or fine felt5. Objects placed on the outskirts of the scene6. More than one object placed with a certain depth7. An object having a certain depth8. Objects continuously moving such as busy streets9. Objects extremely flickering10. Objects consisting of parallel horizontal lines such as a window shade• Matsushita Electric Industrial Co., Ltd shall not be responsible for any inconvenience, damage or loss caused by orattribute to inappropriate settings for the ABF function.17. Special Menu (SPECIAL SETUP)Select "SPECIAL" on the top menu and press the [SET] button.→ The "SPECIAL SETUP" menu opens.17-1. Chroma Level Setting (CHROMA GAIN)Move the "I" cursor to adjust the chroma level.17-2. Aperture Gain Setting (AP GAIN)Move the "I" cursor to adjust the aperture gain level.Lower the level when moire (a kind of noise, optical interference)appears on the screen as part of minute crosshatch pattern, etc.17-3. Pedestal Level Setting (PEDESTAL)Move the "I" cursor to adjust the pedestal level (black level).17-4. Chroma Phase (Hue) Setting (HUE)Move the "I" cursor to adjust the hue (chroma phase) level.17-5. Pixel Compensation Setting (PIX OFF)Perform settings to compensate a maximum of 16 blemish pixelson the pickup device.1. Select "PIX OFF" and press the [SET] button.→ The "PIX OFF" menu opens with numbers from 1 to 16.2. Select a number and press the [SET] button.→ The "PIX OFF" assignment screen opens with a + cursor.**SPECIAL SETUP**CHROMA GAIN ...I...128AP GAIN ...I...128PEDESTAL ...I...128HUE ...I...128– +PIX OFFCAMERA RESET →PUSH SWSER.NO. XXXXXXXXRET TOP END**PIX OFF**1 2 3 45 6 7 89 10 11 1213 14 15 16000 000RET TOP END