Panasonic WV-CW484F Operating Instructions Manual

Also see for Super Dynamic III WV-CW484F: Brochure & specs Specification sheet Specifications Operating instructions Operating instructions

Contents

11q Power cable (12 V DC or 24 V AC)Cautions:1. Connect to 12 V DC (10.5 - 16 V) or24 V AC (19.5 V - 28 V) class 2power supply only. Make sure toconnect the grounding lead to theGND terminal when the power issupplied from a 24 V AC powersource.2. To prevent fire or electric shock haz-ard, use a UL listed cable (VW-1,style 1007) for the Input Terminal.w Video output cable with BNC connec-torConnects with the video connector of themonitor.e Dome coverr Focus lock lever (WV-CW484F,WV-CW484S)Fixes the focus position.t Zoom lock lever (WV-CW484F,WV-CW484S)Fixes the zoom position.y Tilting lock screwFixes the tilting position.u Azimuth (Angle adjuster)Shoots in a straight-angle field of viewwhen aiming at an object in a slantingdirection even if the tilt angle has beenset.i Panning tableAdjusts the panning angle of the camera.o Panning lock screwFixes the panning position.!0 Camera lock screwFixes the camera and camera attach-ment.!1 Monitor output Jack (3.5 diam. minijack)Connects the LCD monitor and suchdevices with 3.5 diam. 2-pole L-type plugfor checking images.!2 Optional heater connector (6 pinfemale)When an optional heater unit is installedin the camera, the harness exiting fromthe unit will be connected to this.!3 LED indicatorShows the ABF status.!4 Operation buttons!5 SET button [(SET), ABF2/MENU]Activates an item selected in the setupmenu. Refer to p. 18 for details on the[ABF2] button.!4 DOWN button [(DOWN), ABF1]Moves the cursor downward and selectsitems in the setup SET UP menu.!5 UP button (UP)Moves the cursor upward and selectsitems in the setup menu.!6 LEFT button [(LEFT), NEAR]Moves the cursor to the left, selects themode and adjusts some levels.!7 RIGHT button [(RIGHT), NEAR]Moves the cursor to the right, selects themode and adjusts some levels.