Panasonic WV-CW484F Operating Instructions Manual

Also see for Super Dynamic III WV-CW484F: Brochure & specs Specification sheet Specifications Operating instructions Operating instructions

Contents

225. Aim the camera at the targeting objects and if applicable adjust the zoom angle.6. Press the [DOWN] button.→ The LED indicator will light up, and a bar graph with "I" cursor and INDICATOR (4-digitnumber) will be overlaid on the camera picture.→ Back focus will be automatically adjusted.7. If needed, perform manual adjustment using the L and R buttons to obtain the best focuson the targeted object while observing the picture. See INDICATOR on the monitor for ref-erence.Notes:• The bar graph will disappear if no operation is performed for around 10 seconds.• When changing the angular field of view, move the zoom lever and focus lever again foradjustment.Zoom/focus adjustmentWhen shooting an object using an AF lens, the first adjusted focus may be out-of-focusdepending on the focal depth of the lens in use. In this case, focus on a darker object with theaperture open to prevent out-of-focus.When "ABF" is selected for "BACK-FOCUS" on the SETUP menu (refer to p. 41), the cameracan automatically focus on a subject with the best available conditions even when the illumina-tion changes.• Under near-infrared light, the focus may be slightly out-of-focus than under visible light.When the "BACK-FOCUS SETUP" page is displayed and "AUTO" or "PRESET" is selectedfor "C/L" ↔ B/W" using the operation buttons on the camera, the camera can focus on sub-jects both under near-infrared light and under visible light. (However, the camera will notchange the focus according to the illumination change when the focus had been adjustedonce.)Before adjusting the varifocal lens, reset the flange-back length position to the defaultposition for the CS-mount (by simultaneously pressing the [LEFT] and [RIGHT] buttons for2 seconds or more, or by simultaneously pressing the [LEFT] and [RIGHT] buttons afterpressing the [SET] button when the cursor is on "MANUAL-ADJ" on the "BACK-FOCUSSETUP" page.NEAR FAR.........|..........INDICATOR 255 FOCUSING