Panasonic WV-CW860 Operating Instructions Manual

Panasonic WV-CW860 Operating Instructions Manual Manual pdf 15 page image

16SETTING PROCEDURESThe following setting procedures are described on the assumption that this model is used in combinationwith the WJ-SX550B Matrix Switcher and WV-CU550B System Controller. In case a controller other thanthe WV-CU550B is used, refer to the table on page 10.■ Menu Display● Setup Menu DisplayWV-CU550B1. Select the camera number you want to set up and a monitor todisplay SET UP MENU.2. Display the D4 menu on the LCD by pressing the appropriate cur-sor buttons.3. Press the F1 button.SET UP MENU appears on the monitor screen.4. To close SET UP MENU, press the F4 button.WV-CU360Press the CAM SETUP key for 2 seconds or more to open theSETUP menu.WV-CU161Press the CAMERA SETUP key for 2 seconds or more to open theSETUP menu.WV-RM701. Turn the MODE SELECTION switch to NORMAL or ALARM OFF.2. Press the PROG switch for 2 seconds or more to open theProgram Menu.3. Move the cursor to Camera Set Up Menu, and press the SETswitch to open the SETUP MENU.● Submenu DisplayThe items marked O can be selected/changed on the submenu.• Move the cursor to an item with the O mark and press the CAM(SET) key. The submenu appears.D4 menuF1F1 F2 F3 F4Camera Set Up MenuRes A.Res ExitF2 F3 F4Camera Set Up MenuOn Exit** RS485 SET UP **UNIT NUMBERSUB ADDRESSBAUD RATEDATA BITPARITY CHECKSTOP BITXON/XOFFWAIT TIMEALARM DATADELAY TIMERET1-----192008NONE1NOT USEOFFAUTO2---Submenu(for RS485 setup)** SET UP MENU **PRESET 1MAPHOME POSITIONSELF RETURNAUTO MODEAUTO PAN KEYDIGITAL FLIPLOCAL/REMOTESPECIAL1CAMERARS485 SET UPOFFOFFOFFAUTO PANONLOCALSetup menu